Usage for hash tag: panoramareef

Tuesday, November 16, 2021, The #panoramareef is in the starting phase with all the up's and downs that goes with it. Now you have to be careful not to rush things . I also went shopping at my main supplier of supplements[emoji16]. I feel Blessed to have a GHL Profilux4 and accompanying KHD...

Double posting

Wednesday, oktober 20, 2021 #panoramareef- placing the sump. The sump was placed between the support beams. A few days later (oktober 25) we made aditional saltwater in the sump to raise the waterlevel of the tank to be able to activate the sump. The main reason for me to install the sump is...

Saterday, oktober 16, 2021. #panoramareef - sump? I wasn't sure whether i wanted a sump, because of the energy spills of moving large volumes of water up all the time. First i planned to use 2-3 surface skimmers, but each have moving part in full light, which would require extra maintenance. I...

Saterday, oktober 23, 2021 - #panoramareef - the liftmechanism. Because the lightfixture was sitting on top of section2 i was not able to do any scaping to make place for the other corals, so i needed to mount the lifting mechanism to get acces to the tank. It took some measuring, fitting and...

Tuesday, oktober 19, 2021 - #panoramareef - the morning after. This is how things looked like the morning after the #DSR1200reef and #butterflyreef was moved to panoramareef section2/3 sectie2/3

Monday, oktober 19, 2021, #panoramareef - transplantation of the DSR1200reef. This was quite a busy day aad leijendekkers come at 12:00 and we had quite a task moving all corals and fish and water from old tank to te new one We try to do some scaping but we would not saw there was no time...

Saturday, 26oktober, 2021. #panoramareef- building a sump ? I did not intend to use a sump as i was suppose to be done. I had some glas lying around in the garden, so i decided to build one either way. Because is didn't want to support and remove a support beam i cut the sump in 2 parts, which...

Thursday, oktober 14, 2021 - #panoramareef - the esthetics (tryout) Drill holes into the doors which serves as handles and placed magnetic doorlocks. Also experimenting with frontpanels for the looks of it. The panorama reef is built in between. The emphasis here is that it must remain fun...

Tuesday, oktober 12, 2021 - #panoramareef - making of the doors. Finally it stopped raining and i work on the door. Sanding the planks, putting the door together and mounting them in front of the stand. My sanding belt was worn out so i stopped. Need to get new an spares to continue. Still...

Tuesday, oktober 12, 2021 #panoramareef - Happy with progres up till now. 5x GHL mitrax LX7205 used on 40% max producing 240PAR on the bottom @40cm waterhight. Slight silcate-algae showing up, which is normal in this stage. In the weekend we did some small chores like mounting doors and lamp to...

Friday, oktober 8 2021 #panoramareef - The move to section1 20:00 Leon Koopmans and Stefan Vonk visited me and at some point i said i was going to move the inhabitant of all the small tanks towards section1 this weekend. They offered to do it right now, so we did..... As well oiled machine we...

Wednesday, oktober 5, 2021 #panoramareef - deadrock and powerfilter. I placed an additional 75 kilo coralsand and 120 kilo deadrock that i had lying around in the garden. The watervolume up till now taken in by sand and rock is about 200 liters The water is clearing up slightly due to the...

Tuesday, oktober 5, 2021 #panoramareef - mainflow direction. Today i am doing the plumbing and determing the mainflow direction. I choose to do the plumbing above the tank because it's saver, easier and less powerconsuming, because there are less corners used and less pipe length required. For...

Sunday, oktober 3, 2012, #panoramareef - sandbed, seeding and feeding. 100 kilo coralsand 1-2 mm was placed into segement 2/3. 40 liter sludge from the EZ550reef was placed into segment1. After that we daily dose 23ml easy carbon. The water is clouded from the sand. We wait 3 days before using a...

Saturday, 2 October 2021 #panoramareef- saltwater mixing. To do this, first turn on some flow pumps to speed up the mixing. Step1 calculate water volume Step2 calculate salts using the CRS calculator Step3 weigh out NaCl+, MgSO4+, Mg+, Ca+ and add them to the aquarium in separate piles. MgSO4+...

Saterday, september 25, 2021 - #panoramareef - last tasks before filling the tank Finally i manage to cut the 55cm strips and glued them. The separationrack fits perfectly inbetween the seam. Next was drilling two 55mm holes to place the tank connectors. These will be used as surface skimmers. I...

Tuesday, September 21, 2021 - #panoramareef fixing section2/3 Today my son finally had time to join me in placing the glass panels. Section2/3 with capacity 2200 liters is glued and is still waiting for the placement of the bracing

Wednesday, 15 September 2021 #panoramareef - drilling 4 holes. Today the diamond glass drills finally arrived. I was waiting to be able to continue. First I had to make a drilling template from plywood and mount it in the right place. To allow fish to swim back and forth from section1 to...

Sunday, september 11, 2021 - moving the #butterflyreef There was no enough space to build the #panoramareef tanksection2, so the butterflyreef needed to move. All the electric wiring of the #DSRreef1200 was in the cabinet below, so that needed rewiring. The tank was emptied down to 10cm, moved...

Saturday we didn't feel like it, so we didn't work on the panoramareef. Sunday, September 12, 2021 - #panoramareef section2 stand finished The day started with cutting away the excess silicone sealant from aquarium1. The stand of section2 was bolted to the back wall, after which it was extended...

Wednesday, september 8, 2021 #panoramareef section1 into final position Clamps removed from tank1 + extra kit on braces Moved 140 liter development tank to diningroom My friend Stefan came and together we move tank1 into it's final position. Cleared the stand for section 2+3 as preparation to...