- Joined
- Jan 3, 2016
- Messages
- 499
- Reaction score
- 512
I'm starting up a brand new 180G RR display in my foyer, this setup will be replacing an existing 125G euphyllia dominated display tank that I have been running for 4 years. Both tanks will be running concurrently until I can get the new display properly cycled and stable. This setup I am also using exclusively the new Philips CoralCare Gen2 fixtures.
My plan:
- 180G RR Marineland display
- Custom 80/20 stand from framingtech.com
- 3x Philips CoralCare Gen 2 lights + controller
- Coralvue Wave Engine
-- 2x Reef Octopus Pulse 2 wave makers
-- 1x Icecap 2K Gyre
- Coralvue Hydros Control 4 aquarium controller setup
-- PH, ORP, Optical Level Sensor, and 2x Temp Probes. 2x 4 outlet wifi power strip
As of now I have assembled the stand, setup the tank, added sand/rock, and filled it mostly full of water. Here is my custom stand from framingtech.com.
My plan:
- 180G RR Marineland display
- Custom 80/20 stand from framingtech.com
- 3x Philips CoralCare Gen 2 lights + controller
- Coralvue Wave Engine
-- 2x Reef Octopus Pulse 2 wave makers
-- 1x Icecap 2K Gyre
- Coralvue Hydros Control 4 aquarium controller setup
-- PH, ORP, Optical Level Sensor, and 2x Temp Probes. 2x 4 outlet wifi power strip
As of now I have assembled the stand, setup the tank, added sand/rock, and filled it mostly full of water. Here is my custom stand from framingtech.com.