40 Breeder Custom AIO

[ReeferDan]

Just wanted to share my new build. Upgraded my 10 Gallon IM Nuvo to this custom AIO 40 Breeder with a divider in the middle. I custom built the stand and canopy. I have one Sicce Syncra return pump split into a connector so that each section of the tank has a return nozzle. The left side of the tank holds the anemones and black storm clown pair from my old Nuvo. The right side will be a bare bottom sps. I attached the hydra 26 lights to canopy and placed to vents in the top along with 2 computer fans in the back for cooling and air circulation.

 

[Tailfisher]

Looks good, in the middle of a build myself. Just can't decide if I want to drill overflow in the middle with two return lines or just place in corner with single return.

 

[ReeferDan]

Looks good, in the middle of a build myself. Just can't decide if I want to drill overflow in the middle with two return lines or just place in corner with single return.

I would do a modular marine overflow in the center with a return line on each end personally. What size tank?

 

[Tailfisher]

Its a 40 breeder I am going to use as a frag tank

 

[ReeferDan]

Its a 40 breeder I am going to use as a frag tank

I think a modular marine center overflow with return line on each end would be perfect. Go with a oversized return pump and you could get enough flow from that alone so you wouldn’t need any wavemakers

 

[Tailfisher]

Thanks, that the way I had originally planned to do it but kept changing my mind.