- Joined
- Sep 13, 2018
- Messages
- 851
- Reaction score
- 976
Hello everyone, I figured it would be good to start my own build thread for several reasons. I got a lot of ideas and help from various folks on R2R, so I would like to pay it back even a bit if I can. Also, it would be neat to see progress for myself and how things evolve and change.
I picked up acrylic (5 foot x 18" x 24") 110 gallon tank several months ago. This is what it looked like when I got it
As you can see it was in a somewhat rough shape, but all seams were looking good and it held water fine. After week long water test I cleaned up algae with Mr Clean eraser. This stuff is magic. I could now see what I was actually working with.
I am guessing PO tried to buff out scratches, used higher grit sand paper and then gave up.
Lots of scratches everywhere.
I picked up acrylic (5 foot x 18" x 24") 110 gallon tank several months ago. This is what it looked like when I got it
As you can see it was in a somewhat rough shape, but all seams were looking good and it held water fine. After week long water test I cleaned up algae with Mr Clean eraser. This stuff is magic. I could now see what I was actually working with.
I am guessing PO tried to buff out scratches, used higher grit sand paper and then gave up.
Lots of scratches everywhere.