Petcrazyson
5000 Club Member
View BadgesWest Palm Beach Reefer
Ocala Reef Club Member
Rocky Mountain Reefers
My Tank Thread
My Aquarium Showcase
Updates ?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I think that's my exact sump! awesome Deal!
I dig it the guy who had it before had a float switch for his ato like the idea but rusted out screw and everything gonna try and find a nylon to replace it with as well as clean up the seal job on it. Show me a puc of your sump area need some real life ideas for set upI think that's my exact sump! awesome Deal!
Great idea. sump overflow...
I dig it the guy who had it before had a float switch for his ato like the idea but rusted out screw and everything gonna try and find a nylon to replace it with as well as clean up the seal job on it. Show me a puc of your sump area need some real life ideas for set up
I ended up drilling my return lines into the back... (from page 1 of my build)Show me a puc of your sump area need some real life ideas for set up
This is perfect thanks1/2 Inch NPT Mini Float Ball Valve Kit Automatic Fill Feed Humidifier Tank Pond Shut Off Water Float Ball Valve, 2 Pack https://a.co/d/6ugwKmn
He has one through the end piece in the return are that has me stumped on why....think im gonna drill a secondary on the overflow chamber for sure might end up putting a secondary baffle in on the overflow compartment..... how is your return area set up ....idk just seems a little different for the return area....was going to maybe grab a acrylic sheet to fill the space in the overflow section and maybe set up for socks kinda up in the air right now....couldnt beat free and helps me to not have to make another sump..... I will be making my own ato though.....show more pics in the am checking for leaks in the tub tonight to be sure.... how do you like the overflows going directly into the overflow area....what you think socks no socks have you seen any major differences not running socks?I ended up drilling my return lines into the back... (from page 1 of my build) (wish I put them off to the side a little)
Then I upgraded my manifold: (both mods have paid off in spades)
Hardware store drawer slides used for control-board: (PSUs behind it - RedSea screwed-up copying me)
Current setup (I black-out the fuge to prevent light spillage):
(room behind sump for ATO reservoir next to kalk stirrer.)
I run a DIY filter floss roller. Before that I made a rectangular box I could slip sheets of filter loss into.He has one through the end piece think im gonna drill a secondary for sure might end up putting a secondary baffle in on the return compartment how is your return area set up its a huge space....idk just seems overkill for the return area....was going to maybe grab in sump reactors to fill the space kinda up in the air right now....couldnt beat free and helps me to now have to make another sump..... I will be making my own ato though.....show more pics in the am checking for leaks in the tub tonight to be sure.... how do you like the overflows going directly into the overflow area....what you think socks no socks have you seen any major differences not running socks?