Best reef ready tank deal of 2024 - whose looking for a new tank?

OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0
Just throwing this out there...
One can use a kessel in the center for the intention of the shimmer it is well known for and actually light your tank with AI blades ( T-5 alt)...

One kessil in the center isn’t enough to light the entire tank

One blade in the front and one blade in the back isn’t enough either

So if we combine this, we have $500 on a kessil and $800+ on blades and the outcome is…$1300 for
- good shimmer in majority of the tank
- good par in the middle 50%
- poor par on the outer 25% on each side, as those areas are lit by the ends of one blade in the front and one blade in the rear

So what’s the answer? Probably another kessil with the blades primarily being used for supplement lighting / pop. And then we have $1800+ invested in lighting and would have a pretty good lighting setup.
Could also light the tank with the noops for $530 or a photon 48 for $900. Or 2 radion xr30 for $2000

Any of these would provide good coverage, and coverage for the tank.

Being that OP is asking about cheaper Chinese light suggestions I don’t think they want to spend over 1000$ on lights

Granted he already owns one kessil so he would be looking at s minimum of 800+ on blades, or 1300 on blades + another kessil

The noopsyche seems like a great option in this situation tbh
 

JoJosReef

10kW Club member
View Badges
Joined
Sep 27, 2021
Messages
12,759
Reaction score
45,100
Location
Orange County, CA
Rating - 0%
0   0   0
One kessil in the center isn’t enough to light the entire tank

One blade in the front and one blade in the back isn’t enough either

So if we combine this, we have $500 on a kessil and $800+ on blades and the outcome is…$1300 for
- good shimmer in majority of the tank
- good par in the middle 50%
- poor par on the outer 25% on each side, as those areas are lit by the ends of one blade in the front and one blade in the rear

So what’s the answer? Probably another kessil with the blades primarily being used for supplement lighting / pop. And then we have $1800+ invested in lighting and would have a pretty good lighting setup.
Could also light the tank with the noops for $530 or a photon 48 for $900. Or 2 radion xr30 for $2000

Any of these would provide good coverage, and coverage for the tank.

Being that OP is asking about cheaper Chinese light suggestions I don’t think they want to spend over 1000$ on lights

Granted he already owns one kessil so he would be looking at s minimum of 800+ on blades, or 1300 on blades + another kessil

The noopsyche seems like a great option in this situation tbh
Sell the Kessil and buy the Noops or a Photon. Best bang for buck.
 

JoJosReef

10kW Club member
View Badges
Joined
Sep 27, 2021
Messages
12,759
Reaction score
45,100
Location
Orange County, CA
Rating - 0%
0   0   0
Well, I got the overflow drain filter, but it doesn't fit.
1724887963535.jpeg

No matter what angle, it's just a mm too wide or thereabouts. I don't want to go pushing it so hard I break the overflow--not worth it. Has anyone else had difficulty with this part?
 
OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0
Mine slides in and out with a slight bit of resistance but not too much. I took it out and it looks like they slightly sanded it. These marks are circular and go all the way around
BDBA6CCA-3F20-4E4C-AABF-281D97726113.jpeg
 

JoJosReef

10kW Club member
View Badges
Joined
Sep 27, 2021
Messages
12,759
Reaction score
45,100
Location
Orange County, CA
Rating - 0%
0   0   0
Mine slides in and out with a slight bit of resistance but not too much. I took it out and it looks like they slightly sanded it. These marks are circular and go all the way around
BDBA6CCA-3F20-4E4C-AABF-281D97726113.jpeg
Good thinking. Might try sanding mine a bit!
 

fishface NJ

7500 Club Member
View Badges
Joined
Aug 27, 2019
Messages
8,131
Reaction score
34,133
Location
NJ and Cape Coral, FL
Rating - 0%
0   0   0
Well, I got the overflow drain filter, but it doesn't fit.
1724887963535.jpeg

No matter what angle, it's just a mm too wide or thereabouts. I don't want to go pushing it so hard I break the overflow--not worth it. Has anyone else had difficulty with this part?

Sorry but I have to ask....why would you want a strainer on your drain? It's going to clog. I have been running a bean animal since 1990.
 
OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0

JoJosReef

10kW Club member
View Badges
Joined
Sep 27, 2021
Messages
12,759
Reaction score
45,100
Location
Orange County, CA
Rating - 0%
0   0   0
Sorry but I have to ask....why would you want a strainer on your drain? It's going to clog. I have been running a bean animal since 1990.
Simple answer is I have no idea. First time with a non-AIO tank. I am imagining it prevents something large like a snail from going through, but I suppose that's what the weirs in the overflow are for as well.

This is a herbie, so would a strainer be even more problematic?
 
OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0

Reefstudent

New Member
View Badges
Joined
Sep 19, 2024
Messages
4
Reaction score
2
Location
Laguna Beach
Rating - 0%
0   0   0
@vintage
Yes. 23 available.
They initially had some whack (but functional) return plumbing, they took my feedback, ordered parts, modified the design, water tested it, sent me photos and video of it

I didn’t post the old design because there’s no reason to. I gave them articles explaining how to do a proper herbie drain and they ordered pvc and the strainer and modified it perfectly to my spec and tested it

re
Yes. 23 available.
They initially had some whack (but functional) return plumbing, they took my feedback, ordered parts, modified the design, water tested it, sent me photos and video of it

I didn’t post the old design because there’s no reason to. I gave them articles explaining how to do a proper herbie drain and they ordered pvc and the strainer and modified it perfectly to my spec and tested it
@VintageReefer - I bought the original prototype from Dennis. He gave me a great deal and so I acquired the old design infrastructure.

I am very intrigued by your modification spec advice and wanted to see if you would be open to sharing with me what you shared to Currents so I can make the upgrades on the return flow infrastructure!

What a cool (tight knit) community that I came across this post. I do not have my tank set up yet i have my aquascape finished ( Marco rock) and going to kick the tank off after I get married 2nd week of OCT.

Let me know if you open to sharing the specs I can provide an email.

Cheers
 
OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0
Original spec
47030441-F092-4CB6-A7A6-19AA0146F79A.jpeg


Corrected
5E2ECEB8-AD53-4BCB-A4E1-FD0A84325B2F.jpeg


Went with strainer instead of upturned elbow

I believe I sent a link to brs article showing herbie setup
 

JoJosReef

10kW Club member
View Badges
Joined
Sep 27, 2021
Messages
12,759
Reaction score
45,100
Location
Orange County, CA
Rating - 0%
0   0   0
@vintage


re

@VintageReefer - I bought the original prototype from Dennis. He gave me a great deal and so I acquired the old design infrastructure.

I am very intrigued by your modification spec advice and wanted to see if you would be open to sharing with me what you shared to Currents so I can make the upgrades on the return flow infrastructure!

What a cool (tight knit) community that I came across this post. I do not have my tank set up yet i have my aquascape finished ( Marco rock) and going to kick the tank off after I get married 2nd week of OCT.

Let me know if you open to sharing the specs I can provide an email.

Cheers
Congrats on your upcoming nuptials!

I also have my tank still in the warehouse and gradually getting more and more components for it. It was originally going to be just a tank! Now I've got all sorts of gadgets and thingamabobs going into it.

Can't wait to just have this new tank behind me (pun intended).
 

Fish Fan

2500 Club Member
View Badges
Joined
Dec 8, 2017
Messages
3,048
Reaction score
6,166
Rating - 100%
1   0   0
I’ve been holding off on posting this but now I’m ready

I came across what I believe is the absolute best deal you’ll ever see on a reef ready system

Background - Current USA had a custom tank built for their marketing photos. It’s all over their website under the sections for r24 led reef bundles

They had the tank custom built and worked with a cabinet company in California to have the stand custom built

The setup came out very nice, and they dabbled with the idea of entering the tank market and selling it. They had a number of these systems built and then…current USA got bought out by saltwateraquarium.com

They no longer want to expand their product line into aquariums, and now have a bunch of these tanks and are selling them off at discount to the private market.

I’ve been in touch with the owner of current USA to discuss it, and they have 23 of these setups ready to ship

The tank is:
- 83 gallons rimless low iron glass
- 48x20x20
- Back panel is black
- Ghost overflow
- Ghost overflow has 3 drains, one drain is capped off.
- Sump and overflow are bean animal ready, but the plumbing kit included in the price is for herbie
- 26 gallon custom glass sump
- 9 gallon custom acrylic gravity ato with float
- custom made cabinet from marine grade plywood covered in faux wood grain laminate
- full herbie plumbing kit, return plumbing, and lockline nozzle
- return tubing is 1”
- if you plan to do bean animal they can customize the stand cutouts and plumbing for a small fee or you can do this yourself after delivery

Custom Tank, stand, sump, ato and plumbing kit…

They are asking $1399 and this INCLUDES nationwide freight shipping, lift gate truck, able to drop off at your door or garage in most situations.

And, if you are serious and going to buy this, and DM me, I can get you an extra 10% off - bringing the total price shipped down to $1259 plus tax

If you can pickup the setup yourself in San Diego the price is $999, I am not sure if I can get that price discounted any more

They will also discount any current USA reef products if you buy this system. I am getting their eflux 1900gph dc return pump for $140, it’s $200 on Amazon if bought separately.

This is a professional and custom build. They even put a bulkhead in the stand for the return pump plumbing to pass through. There are cutouts and notches for wires also.

If you’re serious about buying one add a numbered line and your r2r name to the list and I’ll send you an dm with the info to buy. This is not a “send paypal to Joe Schmoe” it’s a legit website with full guarantees and purchase protection.

Who wants to start 2024 with a beautiful 83 gallon tank build?

I make no money off this, nor do I receive any additional discount.

1) Vintage Reefer
2)

72543D17-6C0E-484E-9B7D-6D66D42E44DE.jpeg 6B5EEEB5-84AC-4AD4-BD71-ED04739461F2.jpeg 52A74DB1-5A1F-46DD-A597-F7E1C4C5E045.jpeg 508E741D-E233-48C0-AAEB-330C671EFF44.jpeg D80F3414-F447-4EBD-8885-457FA61A7374.jpeg 3657A402-C13D-4AC7-A5AA-9B5F8FC539DB.jpeg 5B33749E-748E-40B9-8228-3701F26FAFB0.jpeg 6F4000E1-A3EE-433B-9B8C-DB7DE4BBFDA7.jpeg F2EDDC6D-98E2-4D64-ACE3-5B65ACA752C0.jpeg F4A85595-CA8A-49F9-961B-0C331BFA1945.jpeg 0FE8DF98-CF14-4E72-89E5-625B9AA7965A.jpeg
Out of curiosity, are there any of these left?
 

TangerineSpeedo

Reefing since 1989
View Badges
Joined
Jun 8, 2022
Messages
2,907
Reaction score
4,741
Location
SoCal
Rating - 100%
1   0   0
Congrats on your upcoming nuptials!

I also have my tank still in the warehouse and gradually getting more and more components for it. It was originally going to be just a tank! Now I've got all sorts of gadgets and thingamabobs going into it.

Can't wait to just have this new tank behind me (pun intended).
You haven’t picked it up yet? Dude....
 

Fish Fan

2500 Club Member
View Badges
Joined
Dec 8, 2017
Messages
3,048
Reaction score
6,166
Rating - 100%
1   0   0
You haven’t picked it up yet? Dude....
I've been thinking about it. It's not the dimensions I want, and I'd like to go just a little bigger. I also don't really need the stand, plumbing or sump, but I am looking for a new tank, and this is a screaming deal.

I noticed the link to the eBay page, and that page says there's more than 10 available. It's tempting.

For those that have made this purchase, how did it work out? Any complaints about the system?
 
OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0
Out of curiosity, are there any of these left?

Yes I think approx 10 left

If anyone see this and wants one, make sure you tell the Etsy seller that you are referred from the R2R forum. This will get you the return plumbing upgrade at no cost. If you don’t mention the forum you don’t get the upgrade. It’s a minor thing but might as well get it

Also the closer you physically are to California, the more of a chance you have to save more money.

Part of the cost is shipping. Message them and say you are from the forum and your zip code is xxxxx and ask what the best price they can sell it for

Many people were able to save an extra 10% because the shipping quote came back less and the seller passes on the shipping savings

If you can pick it up yourself there is huge savings also
 
OP
OP
VintageReefer

VintageReefer

10K Club member
View Badges
Joined
Nov 16, 2023
Messages
12,082
Reaction score
20,038
Location
USA
Rating - 100%
2   0   0
I've been thinking about it. It's not the dimensions I want, and I'd like to go just a little bigger. I also don't really need the stand, plumbing or sump, but I am looking for a new tank, and this is a screaming deal.

I noticed the link to the eBay page, and that page says there's more than 10 available. It's tempting.

For those that have made this purchase, how did it work out? Any complaints about the system?

It wasn’t my ideal either, I also wanted a little bigger. But when I priced this vs a 6ft the difference was thousands of dollars and I happily settled.
 

TOP 10 Trending Threads

HAVE YOU EVER HAD A MEMBER OF YOUR REEF OUTGROW YOUR AQUARIUM?

  • Yes, I had to sell/rehome that member of my tank.

    Votes: 16 21.6%
  • Yes, I had to upgrade my system to accommodate the growth.

    Votes: 5 6.8%
  • Not yet, but it may happen soon.

    Votes: 20 27.0%
  • No.

    Votes: 33 44.6%
  • Other (Please explain).

    Votes: 0 0.0%
Back
Top