I was going to build one but just bought one completed at a good price. Here it is. One piece of equipment I dont have to worry about.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looks like one from affinityaquatics in Oregon. Nice!I did the same thing @90's reefer. I bought instead of built because with the stuff I was finding, I wasn’t going to save a whole lot building it myself. Anybody that is looking for a great reg but isn’t comfortable building one or can’t find items (like me) there are some great ones on eBay (pm me and I can provide the seller I used).
It actually is from affinityaquatics haha. Was a great seller to buy from and swapped out the tubing to RO tubing and added a check valve. Also had it packaged very well for shippingLooks like one from affinityaquatics in Oregon. Nice!
Thank you Water Dog for your reply! Current Doser is set on 2.5 Psi and almost ten seconds per bubble. Pic attached.Nice grab... What is your current bubble count and psi? Running a 2 stage regulator is a little different as it requires a bit more working pressure to maintain a stable bubble count. I would try maintain a consistent bubble count with the least amount of working pressure possible. With the high quality metering valves used in these custom regulators, that’s usually around 10 - 15 psi. Then adjust your bubble count to a little less than your current bubble count. Leave it alone for 24 hours and test your parameters from there... adjust accordingly.