Buy Today! THE NEW Orphek OR 120/ 90 /60 - Bars LED Lights

[Orphek]

punisher_corals Orphek
The Best Reef Aquarium LED lighting for Optimal Coral Growth and Color
Available @ www.punishercorals.com

 

[Orphek]

Orphek OR2 blue plus doing is magic

 

[Orphek]

SIAM MARINE

 

[Orphek]

Aqualab gr

 

[Highgrade]

@Orphek What temperature should the OR2 120 power supplies/driver be putting out? Mine seem hot, scalding hot to the touch. Thanks

 

[Orphek]

@Orphek What temperature should the OR2 120 power supplies/driver be putting out? Mine seem hot, scalding hot to the touch. Thanks

If I remember well it written on the power supply. Something like 65c so it can get hot . It normal . For more information email to support to [email protected]

 

[Highgrade]

If I remember well it written on the power supply. Something like 65c so it can get hot . It normal . For more information email to support to [email protected]

Thanks makes sense. Took the temp and they were about 61c or 142f

 

[Orphek]

Thanks to Nice job Andrew B.

 

[Orphek]

Thanks to Alban T. For share with us
“Well enough today to start using the new Orphek lens and these are the results. Aquarium lighting are 2 x OR2 60 reef day plus and 1 x OR2 60 blue plus.”

 

[Hogall]

Are these two OR2 mounted using the Orphek mounting arm along with the Altantik V4?

 

[atoll]

2 x Atkantics and a 120 blue plus light har on my 5' D-D 1500s pro reef. With the light bar attached to the Atlantic's very easily done.

 

[Smite]

Now I just need a 6' model

 

[Orphek]

Are these two OR2 mounted using the Orphek mounting arm along with the Altantik V4?

Hi yes , but in this days we will come with mount part for the OR bar .

 

[GugsJr]

New OR2 Mounting Bars arrived yesterday. These are to be used with the Atlantic V4 or V4 Compact.

They can hold a total of 4 bars when used with a Atlantic V4 or V4 Compact.

While I haven't tried them with OR2 bars only I'm sure you can fit 6 to 8.

The final picture is to show that the angle brackets that come with the OR2 bars don't fit but with some ingenuity you could make them work.

 

[Orphek]

New OR2 Mounting Bars arrived yesterday. These are to be used with the Atlantic V4 or V4 Compact.

They can hold a total of 4 bars when used with a Atlantic V4 or V4 Compact.

While I haven't tried them with OR2 bars only I'm sure you can fit 6 to 8.

The final picture is to show that the angle brackets that come with the OR2 bars don't fit but with some ingenuity you could make them work.

Hi look great , about the last picture, first you not need to use them , but if yes you can drill a hole in the middle, new models will come with hole in the center of the mount part .

Here is how to contact all

Or like this ( Or you can drill a hole at the center )

 

[PGT253]

@Orphek or Atlantic V4 owners, what is the actual total length of the unit end to end (including the antena)?

 

[Orphek]

@Orphek or Atlantic V4 owners, what is the actual total length of the unit end to end (including the antena)?

Please email to [email protected] about . Thanks

 

[Orphek]

Before and after thanks to Andrew B. For share with us .

 

[Highgrade]

Before and after thanks to Andrew B. For share with us .

Looks good! I may have to do this with my Stellar fixtures if the 36" bars become available again.

 

[PhilSD211]

Update on my Atlantik V4.
I placed one Atlantik V4 on my display for testing purposes to see if there was a color difference in corals under the Atlantik V4 and how it operated. I have had the light in place for about 6 months I believe beside 4 of my mitras. I can vouch to say that the Orphek light enhanced the color of allot of the corals underneath it and the pop and flourscents is amazing..especially on fish. Huge difference. There is allot of blue/purple produced by the fixture.

That being said in the last couple months I noticed that the corals didn't pop as much under the Atlantik V4 and I just thought I was getting used to the light. Well that was not the case as I found out later. I have been waiting for months and months on end for the OR150's to complete my build and convert my display over to all Orphek lighting....but after allot of empty promises of "two weeks" its been months and months.

So I decided to start my all Orphek build and put t5 suppliments on the sides instead of waiting another 5 months on the OR150's. I completed my main line up with2 Atlantik V4s and 1 compact V4. This is when I noticed when programming the lights that the 6month old Atlantik V4 had led's not working in the 3rd and 4th Quad. This light is not that old and already burned out led's.

This is very discouraging. I have worked with support and they are on top of it. But this is going to be a pain in the $&& to get this heavy fixture unhung and fixed and now I'm worried that the other 2 I have may be seeing the same issue in short time. I think I'm now going to have to start doing a light test say every 6 weeks to see if the Led's are still firing. This is a hard price to pay to get some extra pop, but I will see how it goes.

I have the main strip hung up now of course because there was no turning back since I had already removed other lighting and prepped ceiling for new lights etc. The tank looks amazing except on each side where i dont have lights in front and back of aquarium. (Missing the or150's or t5's at this point). The 3 lights have very little spread, and with about 9inches off the tank are perfect to not spread light in the room. This is the first time I do not have light spilling over in the room. This is refreshing and really makes the tank stand out. I'm hoping I get more dependability out the lights going forward but we shall see.

When I saw that the UK has the lights. I"m debating on just ordering from them now and call it a day. No more waiting and can try out my original thoughts for all Atlantik build.

@mtraylor are your Atlantik V4 gen 1 or gen 2? I had gen1 and experience the same issues with LED diodes burning out. Bought a replacement gen 2 PCB with "upgraded" LEDs which I was told are better and shouldn't burn out....