Chesapeake Bay Oyster Reef Biotope Tank

Tristren

Well-Known Member
View Badges
Joined
May 16, 2017
Messages
786
Reaction score
808
Location
Ottawa
Rating - 0%
0   0   0
I don't have any pics or vids this time, but the tank is doing well. My basement doesn't have heat, and we're having a cold winter, so my water temperature has been just below 60F degrees for a while now. It was 58 yesterday. I think someone needs to shoot Punxatawny Phil and hire Punxatawny Bob to predict winters from now on. I haven't seen fish fry in a few weeks. My guess is that the 60 degree mark is about as low as any of these species will go to lay eggs. The male blennies are loosely guarding their shells, and some have changed their favorite shell. The gobies hang out in any shell that the other fish don't chase them out of, and are not defending any of the shells except against each other. The large male skilletfish still hangs out in his shell, defending it all the time, but is not guarding eggs now, and probably hasn't been guarding them for a while now. I have not seen any eggs laid in several weeks now. It could also be that the fry won't hatch below 60 degrees, so why would these fish waste all that energy? Instead, they're all getting nice and fat. We've seen such nature in other fish species, females fat with eggs in late winter and spawn when the temperature is right. This is especially true with walleye, musky, bass, and yellow perch this time of year.

Anyway, I'm guessing the spawning routines will once again go full swing when my basement temps heat up in spring, just like in the wild. After all, when planning this tank, I was hoping this type of cycle would happen. Now, it's a bit disappointing to not see fry swimming around...kinda selfish of me, right? But, it's more like nature, I think.

It should be neat seeing everything "wake up" for spring.
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
There isn't much different going on in the tank than my last update, but, even when I don't have time to watch it, I wind up watching for an hour or more. So, this is part of my hour watching last night, right before feeding time. I snuck in before they could see me and beg at the glass for food, almost. One skilletfish was waiting for me before I got there. I feed them at about the same time every night. I wonder if they also have "internal clocks" like we do. Hope you all like the video:

 

Hermie

Valuable Member
View Badges
Joined
Oct 25, 2018
Messages
2,444
Reaction score
2,613
Location
Georgia OTP
Rating - 0%
0   0   0
Hey Kevin, awesome setups you have. Fortunate for them, I bet the animals still think they are in the wild! But less dangers thanks to your care

I came across your posts by searching "Drylok" which I See you've incorporated into your tank with the paint/waterproofer. I wonder if you have ever used or have any advice on using the Drylok hydraulic cement in a tank? I have some left over from a job I did on my foundation and wanted to mix it up to make artificial rock (with aragonite+crushed coral). I could jsut buy portland cement but I figure no reason to waste this stuff if it works. I've used the Drylok "basement waterproofer" on some aquarium pieces before to good effect, but it seems prone to getting scraped off in different spots, I assume from hermit crab claws.

https://www.homedepot.com/p/DRYLOK-Fast-Plug-10-lb-Hydraulic-Cement-00924/100171483
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Thank you! I don't see why you can't use it. As long as it completely cures, it should be inert. I haven't checked the link yet, but as long as it doesn't have any mold resisting chemicals in it, it should be OK.
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Not a good report today...I lost one of my skilletfish. I can't find any visual cause of death. The fish was eating well, good weight, seemed healthy just the night before, with no signs of parasitism, and I found it dead, belly up on the bottom last night. I checked ammonia and nitrite and they were zero, so not sure what happened. All of my fish seem healthy, no scratching. The only thing that I could think of is that it could have been an internal parasite, but I'd expect it to look sickly. Weird.

Well, these fish are two years old now, so maybe that is their life span? I need to research this.
 

chris85

Well-Known Member
View Badges
Joined
May 16, 2016
Messages
530
Reaction score
618
Rating - 0%
0   0   0
That's no good!!

Time to go back out.... Do you still have it or did you flush it?
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Yes, almost time here to collect again, in about a month or so. It's still cold. Usually, around mid-April, the water temps are about right. I flushed the skilletfish last night. Before I did that, I put it in a jar with freshwater to see if any flukes came off of it, and nothing came off. I thought about doing an autopsy, as best that I could, but then said heck with it, LOL.
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
I also keep a 20g high oyster reef brackish aquarium, but this is an invertebrate tank only right now. I don't know if I'll keep fish in it or not. I don't do a ton of maintentance on it, just let the inverts do their thing, feed them daily with flakes, and feed the anemones and crabs frozen shrimp now and then. There are at least two species of mud crabs, 3 ghost anemones, about 20 grass shrimp, a few live mussels, a few barnacles, a bunch of amphipods that rarely come out, and a bunch of clam worms (bristle worms). I feed the filter feeders oyster egg solution as well a couple times each week. Once in a while, I get a treat when the crabs, amphipods come out, and also like to watch the anemones eat. Well, last night, I had quite a surprise when I found a grass shrimp feasting on live remains of a half eaten bristle worm that was in the swimming/mating form. I never thought that grass shrimp would do that since they're so timid. I always thought bristle worms would be aggressive too, but, they are not at all aggressive and really help as part of the clean up crew. Anyway, I have a short video of the grass shrimp feast:

 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
I made substantial progress on the faux sycamore roots for my 75g FW stream tank this weekend. I put about two hours of work on it Friday afternoon, and another couple hours on Saturday morning. I applied plaster cloth to give the structure some more form, and to provide something for the grout to adhere to other than just smooth PVC pipe. I struggled mentally with how this might work and when first working with the plaster cloth, I found it not as easy to work with as I had hoped. However, once I figured out the best way to get it done, I made the best out of the situation that I could, and it worked out well, I think. What was the problem? Basically, the wet plaster cloth losed rigidity fast, as expected, but likes to stick to itself sometimes better than what you're applying it to. Also, it is difficult to work with in tight spots, in this case, between roots. And finally, gravity works against you if you try and work under the structure. To solve the last problem, I simply worked on the front/top first, and then flipped it over to work on the back/bottom of the structure. After that, I flipped it back over, and put the finishing touches on.

In this pic, my first attempt at application, you can see what I'm working with, as I place the wet plaster cloth onto the structure. Basically, you drag a strip of the cloth across a pan of water, and then apply it to your structure. Then, use your fingers to spread the plaster around a little bit. This becomes the base for the next strip, as you have to overlay the next strip in some way over part of the first one. As I said earlier, it sticks best to itself.
IMG_0771_zpsacq71fhp.jpg


After I was done with it, I took a few photos off the work bench. This first one is a front view:
IMG_0776_zpsu3ksu6qi.jpg


Front, sort of off to the right:
IMG_0775_zpsv3i7wo5n.jpg


Right side view:
IMG_0777_zpsvxumayqq.jpg


After that, I fitted it into the tank. The first pic is what it looks like today, the second pic is what it looked like prior to the application of the plaster cloth:
IMG_0778_zpstbpenrul.jpg

IMG_0495_zpslhslwfgc.jpg.html

IMG_0495_zpslhslwfgc.jpg


I'm fairly happy with it, but, a few things bug me. The hole in the "knot" that I tried to create became much smaller than I had hoped. I may have to drill or cut it out, the reapply some plaster again, or maybe skip the plaster and just coat it with grout. The small root coming down out of the middle looks like ET's hand, asking the viewer if he could "phone home". I think that I can live with that. There are a couple other flaws that I don't like, but will have to live with, that maybe nobody but me would worry about.

The next steps: apply grout and final form, to supply the structure with some weight and durability, and to hide any of the pipe look and get rid of straight lines. After I'm happy with that, then I'll paint it with Drylok mixed with cement dye to give me the colors and realism that I want, as close as I possibly can. This should also seal in the grout and plaster and prevent water from seeping in, preventing pH spikes from happening and also from plaster getting into the tank. I will apply several layers of Drylok.
 
Last edited:
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Last week, I noticed another skilletfish acting weird, not coming to the front to eat, breathing heavy, not interested in food if I put some near it, etc. My fear was that it was going to die like the other one did, mysteriously. So, I decided to treat it with Prazipro, thinking that perhaps I never got rid of the flukes. My reasoning was that a couple gobies have been scratching for a while now, not going crazy or acting sick, but, that is a sign that it could be flukes. Anyway, that was Wednesday night.

On Friday night, I got home, took out some leftovers for dinner, put them in the microwave so that my wife and I could eat dinner and watch a TV show. While the food was in the microwave, I went downstairs to check on my fish.
The sickly skilletfish was still in the same shell, doing the same thing. The previous night, at feeding time, only two fish came out to eat, the others hid in their shells, although a few of them did eat when food drifted by. But, normally, they all come out to eat out of my hand. I shined my flashlight around the tank, as not many fish were poking their heads out, and that worried me. Inside one of the shells, I noticed one of the male blennies upside down, breathing heavy. There was another male blenny that wouldn't come out of his shell and eat that I noticed the night before too, and he had me worried.

I went into panic mode. I had plenty of circulation and aeration in the tank, but, maybe the fish couldn't take the meds. So, in my mind, 90% water change, so I drained the tank. Only a small amount of water was in the tank, with the fish.

While I was at it, I figured that I'd pull out the oyster cultches and fix some of the things that fell apart over time. For example, there was an overhang that I thought was really cool that broke apart and fell, and I really wanted to fix it. There was another couple of oysters that fell off that weren't originally glued well also. These things really bugged me, even though things looked OK in the video, I hated knowing that it wasn't as I had planned.

Of course, pulling out the reef meant that fish could be in the reef, out of the water, and I had to shake a few fish out. The blenny that hid in his shell wouldn't come out that I was worried about was one of the fish that I had to shake out. I finally did, and then I saw why he was behaving that way...not disease...he was guarding eggs! Well, that was good news.

Anyway, I thought the upside down blenny was dying for sure, but, after removing the reef, I counted all of the blennies swimming around just fine. He was probably just in the shell, as they always do, acting goofy in his shell. I panicked for no reason.

Of course, when pulling the reef out, I was worried about leaving a fish stuck in it, but as it turned out, all of the fish were accounted for. I didn't find any crabs, so I don't know what happened to all of the crabs in the tank. They could still be in the tank buried in the sand. I hope that they weren't in the reef, because it's been out of the water under repair since Friday night.

I filled the tank with newly mixed brackish water, increasing the salinity just a tiny bit. I left about a dozen loose oyster shells in the tank for hiding spots, and tossed in a half dozen PVC pipe sections for additional hiding spots, with the hopes of calming the fish down and easing potential aggression.
IMG_0843_zpsqtrmzrnp.jpg


Anyway, I repaired the large overhang and it looks really good:
IMG_0839_zpsrej6cvcr.jpg


I beefed up the two other overhangs and any other loose oyster shells:
IMG_0841_zpsqo76el9l.jpg

IMG_0840_zpsh8kqvoop.jpg


I also removed a dozen complete oyster shells that I collected that were laying by themselves on the sand, that were loose or had come completely apart, with the purpose of gluing them together. I also wanted to glue them to the cultches to provide more hiding spots on the main structure. The clothes pins are about a half inch thick, and are perfect spacers for gluing open oyster shell hiding spots. I used thick rubber bands to since them tight so the glue would hold nicely.
IMG_0842_zpseug3wcqy.jpg




After they dried, last night, I glued them onto each of the structures pictured above, adding a dozen new open oyster shell hiding spots solidly to the structure, Previously, these shells were either lying on the bottom of the tank, or loosely stuck in crevices in the reef.

The problem is that, even though the dead oyster shells are great cover, and the fish use them, they eventually come apart and become litter on the bottom of the tank. I wanted something more permanent. And, since they also like the permanently glues ones on the reef, I figured more is better.

Tonight, I will remove the remaining oyster and clam shells from the tank and repair them. Then, I'll place the oyster reef back into the tank, and tomorrow night, place the repaired oyster and clam shells strategically in the tank (where I can easily observe them). I need 24 hours for the glue to cure.

By the way, I used Gorilla Glue again. Most of the reef is still really solid, so I'm happy with how it held together over time. I just used more of it on the overhang, and it's really solid now. I just didn't use enough glue the first time. Also, last night, after gluing the new hiding spots permanently on the structure, it looks really good. I couldn't be happier.

I still am not sure what to do about the "sick" skilletfish. I may QT it and try and treat it. Maybe the water changes will help it recover, I don't know. I'll do another one tonight, maybe 50%. The rest of the fish are doing OK, although disoriented because their favorite hiding spots were removed. I think that once I return the reef to them, they'll get back to doing what they do.
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Last night, I removed the remaining complete oyster and clam shells, and the PVC pipe. I'll glue the compete shells and place them strategically into the tank tonight to provide additional hiding spots. Once I build the larger reef, I'll wind up gluing these to the other sections of the reef that are currently not in a tank. I placed the improved structure with the repaired overhangs in the tank, and I'm really happy with how it turned out.

I moved the remaining shells in the tank that were halves or pieces to the front of the tank until I decide what to do with them. I will keep the ones in there that have good "life" on them. I may or may not keep the others. What I've learned is that eventually, some of the shells, even complete oyster shells, will be buried in the sand. Current and critters cause this. I have no idea what happened to the mud crabs in the tank. They may still be in there, but I haven't seen them. They could have been in the reef when I removed it for repair, but, I never saw any sign of them climbing out. I might find one on the floor in the rec room some day, LOL.

Anyway, below is a pic of the remaining shells that I glued lat night. I use a clothes pin to create a 1/2" gap. There was a journal written about the gap preferences of striped blennies (and other benthic fish) for breeding purposes, and their findings showed that 1/2" was the optimal gap. I glued the inside base of the shell with Gorilla Glue, placed the pin in the front of the shell, and used rubber bands to bind them until the glue dried. The clams need less glue, because the joint is stronger than oysters. I used the clothes pin for them too. The clingfish prefer the clams, it seems, but that may be because the blennies prefer and use up the oyster shells. In truth, when hiding, they all use anything available. Here are my gluing efforts, and results:
IMG_0846_zpstmje0feg.jpg

IMG_0847_zps5yf1bawg.jpg

IMG_0848_zpsh5mnmaxb.jpg


The tank was too cloudy last night because of the work that I did removing everything, so I couldn't take a pic. I cleaned out the filter and put in a new pad. Hopefully, the filter will keep working. Last night I found it had stopped. I cleaned it out again and the impeller was stuck, so I freed it. Although it's noisy, it was working after the repair and cleaning.

I took a pic this morning after the filter did some work. I don't have an FTS before the repairs (with the overhangs collapsed), but here's a video where you can see it in the first 30 sections. After that, the pic shows it all repaired:



IMG_0849_zpsoeoeptg9.jpg
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
I "planted" the remaining complete oyster and clam shells throughout the tank, some placed on the reef structure, some in the substrate. I grouped most of the razor clams together to simulate a colony of those, and moved the half oyster shells around the bases of the reef structure. I think that it turned out pretty well, very similar to the early days of the reef. I may move the two major cultches on the right side a little tighter together, and more to the left, to create additional open space under the overhangs. Overall, I'm happy.

The fish seem happier, much more bold today than the past few days, coming out for food and even eating out of my hand. The one skilletfish that I'm worried about is still not eating...I'm not sure at this point that there is anything I can do for it. It doesn't look all that bad, so maybe it will turn around, we will see. If it starts eating again, then I'll feel much better.

Here's the latest FTS:
IMG_0851_zps4vccs9y3.jpg
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
I shot a couple videos and uploaded one to YT last night. The fish are still skittish from my hands being in the tank so much. To them, it must have seemed like Godzilla crashing through town when I broke the scape down and set up up again. The fish are cruising the structures and checking out all of the new hidey holes, re-establishing territory, etc. My guess is that egg laying will start again pretty soon. The males are all nicely colored now, which is either a good sign that they're going to spawn soon or that their happy in their new oysterscape. It could be a little of both. Anyway, hope you like the video:
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Bad news:
My largest male blenny committed suicide, and jumped out of the tank last Thursday night. I found him all dried up on the floor. I had one small spot that they could get out next to my HOB filter, and that's where he was, on the floor, under that spot. I found a temporary solution to fix that issue. I don't know if it jumped because of me rearranging the tank and huge water change, or if it was spawning stress from rival males. The tank is almost like it was before, with even more hiding spots. I thought that they might resume finding the same shells that they had before, but, they seem to have found new spots to defend.

Good news:
I think that I mentioned that during the winter, with water temps dropping into the 50's, that my fish pretty much stopped laying eggs. The amount of daylight might have something to do with this cycle too, as there is exposure to daylight via a nearby window. I didn't see any other spawning activity during that time. I was a bit worried about that.

However, things are beginning to happen again with the blennies. Now that spring in my area has arrived, and tank temps are now around 62F, they've started some spawning activity, but the male blennies are all fired up. Also, when I broke down the tank, I found a shell with eggs in it, so, it's not because of the giant water change. Things were already happening and I just didn't observe it.

In this video, you'll see a male striped blenny (Chasmodes bosquianus) flash and chase a female, trying to lure her to his shell. He is interrupted by a rival male, and a confrontation ensues, with the first male winding up chasing the other one off. Enjoy!

 

chris85

Well-Known Member
View Badges
Joined
May 16, 2016
Messages
530
Reaction score
618
Rating - 0%
0   0   0
Everything is looking GREAT!!(In my best tony the tiger impression)

You make me want to try these again!!! Maybe that is where I am going wrong... keeping only one.
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Thanks Chris. I'm convinced that with Chasmodes blennies, that they live in tight quarters in the wild oyster reef, much like they do in my tank. When collecting, I've caught multiple blennies in one scoop of the net, as many as four in one scoop, not to mention other species. I often wonder how many escaped the net. Their territorial boundaries in the tank seem to be about 6-8" in diameter before confrontations occur. The occur more frequently during feeding time, when the males leave their shells to eat, and run into each other. Also, the female draws the males out, and they compete with each other over her. Spring is here, love is in the water!
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Last week, I showed males starting to get aggressive due to spawning activity, re-establishing their territories, more actively defending oyster shells, sparring with each other, and flashing the female while trying to herd her towards their shells.

This weekend, for the first time since I broke down the tank, I found a male guarding eggs. I wouldn't be surprised if the others are also guarding eggs. I can't tell because they both hang out behind the oyster structures out of sight until I feed them.

I was worried about this particular male before I broke the tank down, because he was the smallest male. He was picked on and chased by the other males, and was the only one that hadn't bred with the female, to my knowledge. Now, he chases away the larger males and defends his shell as brave as any blenny possibly could! And, his shell is right in front of the tank for me to film. Soon, there will be fry swimming around again. Here's a video showing the eggs and other activity around the tank, and also, later in the vid, you can see the female skilletfish stuck to the glass, and can easily see that she's ready to lay eggs too. Hope you enjoy the video, thanks for watching.


I guess my theory was correct, that when temps in my basement went down, breeding activity came to a halt. When they crept back up, it resumed. I suspected that would happen before the winter began. There were eggs in a shell when I broke the tank down, and they've resumed again a few weeks later.
 
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
I was thinking about the health of my tank last night. My fish seem to thrive even though it's a small tank. I have 11 fish that are between 3 and 5" long. They're all fat and breeding. When I caught all my fish, they averaged and inch long, and grew to adult size in about 8 months. I've had this tank set up for two years now. I began with 7 striped blennies, 5 skilletfish, and 5 naked gobies. I now have 4 striped blennies, 2 skilletfish, and 4 naked gobies.

How I lost fish:
Blennies - One adult female blenny jumped out of the tank after my disease outbreak while being treated in QT. The other blenny lost was a male that jumped out of my DT a couple weeks ago. I had one adult male blenny die after going blind about 6 months ago.

Skilletfish - Two adults died of disease during the outbreak, one just went missing this week (it was the one that wasn't eating). I assume it was an internal parasite.

Naked gobies - I lost one a few months ago, unknown, found dead but seemed healthy until then.

I haven't been testing my parameters in months. I got lazy, so last night, I tested for ammonia (zero), nitrite (zero), nitrate (50). I thought that if a fish was missing and died, that the levels would have been elevated, but not, so I was surprised by that.

Invertebrates in both tanks:
Ghost anemones - I had three in my DT and thrived until I returned my fish from QT, then they disappeared. I had three in my invert tank, and one is huge and thriving. The others could be alive somewhere in the oyster cultch. They move around a lot and are hard to see, but I haven't seen them in a month or so.

Tunicates - I had them in both tanks. They live about 6 months as adults then die off. Every now and then, I'll find one inside an oyster shell, but haven't seen any in a while now (about three months). There could be some deep in the cultches, but I may have killed them when I pulled the reef apart for repair, because the reef was dry for a few days.

Barnacles - Some died that I collected, but, I still have a few (2 different species) that have lived for over a year now and are doing well. I think that once they survive the early stages of captivity, some adapt and do well if fed properly.

Mussels - Same as barnacles, I've collected and kept about a dozen of them between the two tanks, but most have died off. I still have four alive that seem to be doing well that are a year old now.

Grass Shrimp - I've been able to keep them in the DT with the fish for about 6 months, then they gradually disappear. Some jump out of the tank, and I think the fish killed and ate some too. In my invert tank, they can't get out, and have lived over a year now. I started with about 30, and there are about 20 left, but, they're hard to count because they move around a lot, and hide throughout the reef. So, there could still be 30 in there.

Mud Crabs - I've kept two different species. In my DT, I didn't find any when I pulled out the reef, but, there could still be some in the tank. They hide in the reef and also bury themselves, and I really didn't look for them. Some may have died or crawled away when I pulled the reef out of the tank. I haven't found any on the floor though. In my invert tank, there are 6 mud crabs, at least, that I see now and then.

Bristle worms - They are doing well in both tanks. I see them out all the time in my invert tank, but never come out in the fish tank. I see them burrowing around the glass in the sand though, so they're there. I think that they only come out at night.

Amphipods - The fish ate all of them in the DT, but some are still alive in my invert tank. I see them now and then feeding on algae on the glass. They're nocturnal, and very wary, and hide all the time.

Copepods - I had a bunch that I always saw on the glass, but since I used Prazipro, I haven't seen any lately. It might be because I cleaned the glass, but I used to see a few even then. The glass is starting to get algae again, and is due a cleaning, but I think I'll wait and see if any pods appear. I never see any in the invert tank, because I think that the anemones eat them. I'm sure that some are living in there though.

Snails - I found one lone micro sized snail living in my DT when my fish were in QT. But, I haven't seen it since the fish were returned. The fish may have eaten it.

One possible thing that could have happened is that maybe some of the inverts that died off in my DT when I returned my fish from QT, could have been due to elevated ammonia. I did water changes during that time and tested, and there was some ammonia and nitrite present, prior to the water changes. That could have caused the die off rather than the fish eating them. I don't think it would have affected the grass shrimp, but the anemones and snail could have been victims due to that.

So, the question, in my mind, is, will some of these inverts survive with adult fish or are the fish killing them? Ultimately, I'd like to keep the whole cast of characters, a true biotope. We will see.
 
Last edited:
OP
OP
Chasmodes

Chasmodes

Well-Known Member
View Badges
Joined
Dec 11, 2014
Messages
563
Reaction score
758
Location
Maryland
Rating - 0%
0   0   0
Recently, I posted the status of life in my tank, and pointed out that anemones disappeared from the 20g long fish tank, and that I hadn't seen two anemones of the three that I knew were in there in a long time, and thought that they were dead in the 20g high invert tank.

Well, I have an update. In the 20g high invert tank, I found one of the anemones. It must have been hiding in the oyster reef, and finally moved out into the open one day. Here is is, stuck to one of the oyster shells.
IMG_0934_zpszq52sfmd.jpg


Then, two nights ago, I pulled out my magnifying glass and was going around the tank looking for other life, and found an anemone! All this time, I thought that the anemones were killed by the fish in this tank. It was poking out of the sand, tentacles only. At first, I thought that they were worms, but under closer inspection, definitely an anemone. It hasn't been out since then, unless it moved again. I don't have a picture of that one yet. I have to wonder about the other anemone that was in there, if it's still alive too.

Anyway, I thought that was pretty cool.
 
Back
Top