Can you post a photo?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yes the fluid in the trace elements will finish helping the carbo cal dissolve but the majority should be dissolved in just the RODII'm fairly certain the trace elements are needed to get everything into solution and in fact are really a key component in this regard.
I tried that too and it didn't work. Also I'm using a beaker that has the measurements on the sideHow are you measuring the RODI?
Are you waiting until the CarbCa is almost all gone before adding the Mag? Then wait until it's almost all gone and cleared up before adding the Traces?
Carbo doesn't dissolve at all, even when I go really slow with the carboSo when does it form sludge? If the carbo cal is almost all gone before adding the Mag.. then what?
What are you using to measure the liquids?
Maybe something wrong with the carboCa? I have never had a problem dissolving it. You are using RODI? btw a beaker is not very accurate. Better to weigh 750g of water.Carbo doesn't dissolve at all, even when I go really slow with the carbo
Maybe your RODI isn't pure?Carbo doesn't dissolve at all, even when I go really slow with the carbo
Rodi is pure, measuring 0tds. I'm running a spectrapure Megamax cap unit with .5 micron sediment, .5 micron carbon filter, 99% reject membraneMaybe your RODI isn't pure?
Is that just the carboCa and water? The beaker isn’t an accurate fluid measuring device. That could be part of the issue. You also mentioned it was mixing at 2000 rpm?? Maybe your looking at a cloud of micro bubbles? If you let it sit for 30min what happens?
Yes it's carbo and water and ill measure the grams of water . When the water and carbo mix, it's forming micro bubbles and acts like a soda would... I've read on other threads where people are mixing at 3000rpmsIs that just the carboCa and water? The beaker isn’t an accurate fluid measuring device. That could be part of the issue. You also mentioned it was mixing at 2000 rpm?? Maybe your looking at a cloud of micro bubbles? If you let it sit for 30min what happens?