** FLSharkvictim / Custom Rimless SCA 150 Build ***

[FLSharkvictim]

My DOS came in today for my AWC's!

 

[FLSharkvictim]

Moving my 150 so I can start hard plumbing it so I bought two sets of 2 of these FCHO Glass Suction Cups - that are Heavy Duty Aluminum Vacuum Plate Handle Glass Holders to Lift my SCA150 RIMLESS TANK to the correct location in my new house...

 

[RobB'z Reef]

great build so far!

 

[FLSharkvictim]

great build so far!

Thanks for following along this wicked dream build that I have been working on for over 3 years

.
Here is my revised Inventory checklist for all plumbing parts / Spears Gate Valves / Cepex ball valves and Wye Check valves. I will be moving the tank to the correct spot this weekend and plumbing it the following weekend.

Schedule 80 1/ 1/2'' Fittings
90's: Elbow Slip x Spigot (Street) qty 2
90's: Slip x Slip qty 7
45°: Slip x Slip qty 7
Unions: Slip x Slip qty 3
Coupler Slip X Slip qty 3


Schedule 80 1 1/4'' Fittings
Reducing Bushing 1 1/4” Spigot x 1” Slip: qty 2
1 1/4" x 24" Red Schedule 40 Pipe: qty 2ft
1 1/4” Schedule 80 45° Elbow Slip x Slip - qty 2
1 1/4” Schedule 80 Coupler Slip X Slip - qty qty 3
Reducing Coupler 1 1/4” Slip x 1” Slip - qty 1


Schedule 80 1'' Fittings
90's: Slip x Slip - qty 8
45's: Slip x Slip - qty 6
Tee's: Slip x Slip - qty 4
Unions: Slip x Slip - qty 8
Pipe Adapter Spigot x Barb - qty 4
1” Coupler Slip X Slip - qty 4
Spigot Plug 1" QTY 1
45° Elbow Slip x Spigot (Street) qty 5


Schedule 80 3/4'' Fittings
90's: qty - 5
45's: qty - 5
Tee's: qty - 5
Unions: qty - 5
Coupler Slip X Slip - qty 3
Spigot Plug 3/4" - qty 1


Schedule 80 1/2'' Fittings
90's: qty 5
45's: qty 5
Tee's: qty 5
Unions: qty 5


Spears Gate Valves:
1.5'': qty 1
1'': qty 2
3/4'': qty 2
1/2'' qty 2


Cepex Ball Valves::
1.5'' qty 1
1'' qty 5
3/4'' qty 2
1/2'' qty 1

Sch 80 Red PVC pipe:
1.5'' 46" RED PIPE qty 3
1'' 46" RED PIPE qty 2
3/4'' 46" RED PIPE qty 1


Wye Check Valves:
1'' qty 2

 

[FLSharkvictim]

Had to move all of my live rock that's currently recurring inside instead of my garage where temps were hitting 90+
I'm currently recurring around 100lbs of Marshall Island & Tonga Branch live rock for my this build.

 

[FLSharkvictim]

Working on floating my Orphek compact Gen 2 lights from my ceiling, so I have decided to buy 2 of there new Orphek Universal Fixing Bracket bars to make much easier for me down the road to add there new Orphek - OR3 lighting to give my tank more pop like what you see in the picture below:

 

[revhtree]

Nice new build you have going on!

 

[FLSharkvictim]

Nice new build you have going on!

Many thanks David!! It's finally all coming togerther.. The hard plumbing will began in 2 weeks so I can finally get some water in this SCA150 ones in for all . Anyways, how was Reef-A-Palooza in Orlando?

 

[Peace River]

Build looks good - cheering for you! RAP Orlando is this weekend and I'm sure it is going to be a great time!

 

[FLSharkvictim]

I ordered some more goodies for my build...
'I bought another EB4 for my saltwater mixing station, so now i can run my tank and mixing stations controlled by 1 apex. Plus some extra Sch 80 fittings and the FMM module 1'' flow sensor from # BRS!

 

[FLSharkvictim]

Today was a good day in the Tampa Bay, finally moved my SCA 150 to the correct location of my house.
Plumbing will start in the next few weeks so stay tune.....

 

[FLSharkvictim]

Got in some more goodies from Bulkreefsupply.com - Saltwater Aquarium Supplies.. I need a bunch of 90's and 45's and a few more Cpex ball valves plus another Apex #EB4outlet so I can totally control everything on my 50 gallon saltwater mixing station. I bought the 50ft custom made Aquabus cable from Firewire b/c Neptune does not make them since my tank and my mixing station sits around 40 ft from each other.. Next week I will be starting the hard plumbing with all Spears Gate valves and Cepex Ball Valves along with all sch 80 fittings..

 

[benapilot]

Looking good!!

I like your blue labels! Is that just blue Dymo label tape?

 

[FLSharkvictim]

Looking good!!

I like your blue labels! Is that just blue Dymo label tape?

Thanks for following along... Yes sir!! I got Red / Green / White / Blue / BlACK which I will use to label all 6 plugs coming out of my Apex.

 

[jmichaelh7]

Got in some more goodies from Bulkreefsupply.com - Saltwater Aquarium Supplies.. I need a bunch of 90's and 45's and a few more Cpex ball valves plus another Apex #EB4outlet so I can totally control everything on my 50 gallon saltwater mixing station. I bought the 50ft custom made Aquabus cable from Firewire b/c Neptune does not make them since my tank and my mixing station sits around 40 ft from each other.. Next week I will be starting the hard plumbing with all Spears Gate valves and Cepex Ball Valves along with all sch 80 fittings..

How did you make your equipment cabinet ?
What size sump are you running

 

[FLSharkvictim]

How did you make your equipment cabinet ?
What size sump are you running

I bought my panels from Marine Depot a while a go...

My sump is a Synergy CL-44 w/ a Matching Synergy 10 gallon ATO that connected to my 50 gallon salt water mixing station.. I also bought 2 DOS pumps so my water changes will be fully automated with my Apex controller.

50 gallon saltwater mixing station.

Just 1 EXAMPLE on how I am going to hard plumb my External oVERFLOW BOX...

-----------------------
UPDATE ON MY BUILD - I AM BACK:
As we all i know i HAVE been AWOL for a few years.. I have been concentrating on work which required me to travel out of town a lot .. I am now working remotely so i am back and READY to finish up this build ones for all.

The only thing that I need to do in order to get this beast up and running is to hard plumb my entire system which is currently a work in progress. I am going to be running a Synergy 20" external Overflow box w/ 2 COR20 pumps.
Plus two EcoTech Marine MP40's and 2 TUNZES pumps for tons of circulation and a Algae Scrubber which will all be plumbed in.