I'm trying to add control of my HS300 Kasa strip into reef-pi. I've been able to add the driver and outlets. However, I keep getting 500 errors after I add the first equipment linked to each power strip. Any ideas?
Getting Error on hs300 equipment add
- Thread starter TCoach
- Start date
- Tagged users None
fishface NJ
5000 Club Member
let me bump this post so you get a response. I don't use reep pi. Good luck!
Any chance you powerstrip ip has changed?
Check if the issue resolves after reloading (not reboot). If so, it could be the reef-pi starts before the network when pi is powered up. Depending upon whats going on, we can employ specific fix
Check if the issue resolves after reloading (not reboot). If so, it could be the reef-pi starts before the network when pi is powered up. Depending upon whats going on, we can employ specific fix
OP
OP
Not sure what changed, but now it is working. I do know I had to static IP both kasa strips. But even after I did that and restarted everything, it was not working.
Something weird. Anyway, now it is working.
Thanks!
got it. remember those two things that can go bad, hs300 changing its ip, which we cant fix easily on reef-pi side, and second reef-pi starting before network (can be fixed by updateding the systemd unit files to make sure reef-pi starts after network).
Similar threads
