Hardscape feedback please

Clo

Well-Known Member
View Badges
Joined
Feb 8, 2021
Messages
627
Reaction score
1,546
Location
New Orleans
Rating - 0%
0   0   0
Working with some rocks for my hardscape.
First time and needing some feedback from some more experienced individuals.

#1
FF0E6B8C-5687-4160-9084-4B2A93A96967.jpeg


#2
C38E520E-A472-4624-903F-6AD4A43D007C.jpeg


#3
6A889FDD-FEBE-4BA5-8815-0CCB5AEF581C.jpeg



Really like #1 because it has a low shelf that allows for fish to hide but seems like a nightmare to clean. And it’s for a 35 gallon so it’s not like I’ll have a lot of fish. #3 seems less cluttered and rock heavy, with the most space for things to grow into. Not sure
 

Weasel1960

Valuable Member
View Badges
Joined
Aug 22, 2020
Messages
2,139
Reaction score
9,995
Location
Monticello, WI
Rating - 0%
0   0   0
Personally all 3 are really nice starts. I do like 1 but the low cave will be hard to keep clean unless you get some flow moving through it.

Have you looked at the Bulk Reef Supply Aquascaping videos? They talk about the “rule of thirds”. I bet with a little extra height overall you might be able to get that cave a little higher so it could be cleaned.

Also keep in mind rock placement for tank cleaning. Leave 2”-3” all the way around AFTER anticipated coral growth.
 

Jekyl

GSP is the devil and clowns are bad pets
View Badges
Joined
Jan 15, 2019
Messages
11,271
Reaction score
15,489
Location
Michigan
Rating - 0%
0   0   0
+1 for number 1. Little advice, if you have an extra rock put it on top of the left side. I wish I would have gone a little higher with my scape
 

Fishnut

Well-Known Member
View Badges
Joined
May 18, 2018
Messages
613
Reaction score
973
Rating - 0%
0   0   0
1. I love caves. I use a turkey baster to blow out caves and live rock weekly
 

Pistondog

5000 Club Member
View Badges
Joined
Jun 28, 2020
Messages
5,264
Reaction score
9,402
Rating - 0%
0   0   0
1 for the hidey holes and differences in height, which creates eye appeal.
Maybe even taller on the left.
Nice look though.
 
OP
OP
Clo

Clo

Well-Known Member
View Badges
Joined
Feb 8, 2021
Messages
627
Reaction score
1,546
Location
New Orleans
Rating - 0%
0   0   0
Thanks for the suggestions!!
I’ll try and mess with 1 a little more then :)

I tried to keep mindful of the 2-3 inches from the glass but didn’t realize it’s with consideration of potential coral growth
 

sp1187

bird flu antidote
View Badges
Joined
Aug 4, 2017
Messages
13,345
Reaction score
69,067
Location
the duck blind
Rating - 0%
0   0   0
Fiji Pink, and livestock I’ve only decided on clowns, anem, and zoas
ok, #1.
go higher, like almost to the waterline on the left back corner.
my scape clears the waterline. my once 2, now 5 bta's hang right at the top,
sometimes with their tentacles breaking the surface. my lfs has bta's doing the same.
get a strawberry conch and cleaning under the tight hand ledge is a non issue if there
is enough height between the substrate and the bottom of the ledge. and that ledge will
look fab with a zoa garden.
 
OP
OP
Clo

Clo

Well-Known Member
View Badges
Joined
Feb 8, 2021
Messages
627
Reaction score
1,546
Location
New Orleans
Rating - 0%
0   0   0
ok, #1.
go higher, like almost to the waterline on the left back corner.
my scape clears the waterline. my once 2, now 5 bta's hang right at the top,
sometimes with their tentacles breaking the surface. my lfs has bta's doing the same.
get a strawberry conch and cleaning under the tight hand ledge is a non issue if there
is enough height between the substrate and the bottom of the ledge. and that ledge will
look fab with a zoa garden.
I’ll see how I can try to simulate that kind of height without gluing for now :)

thank you!
 

drewwCh

Active Member
View Badges
Joined
Aug 5, 2020
Messages
230
Reaction score
201
Location
Indonesia
Rating - 0%
0   0   0
+1 to 1 as well.
As others have said, it'll be a bit better if the rockwork was higher, but not too close to the waterline.
Also, you might want to glue that peak rock that's balancing between the two structures to prevent it from falling.
 

1Arrecife

Community Member
View Badges
Joined
Jan 3, 2021
Messages
33
Reaction score
77
Location
Berwyn
Rating - 0%
0   0   0
I like #1 it gives you a good sense of depth. The focal point is there. It makes me wonder what's behind that archway as the path draws me in, or what's inside the cave. I agree with the others, work vertically now to draw the eye away. You want fish swimming mostly around the scape or over it?
 
OP
OP
Clo

Clo

Well-Known Member
View Badges
Joined
Feb 8, 2021
Messages
627
Reaction score
1,546
Location
New Orleans
Rating - 0%
0   0   0
+1 to 1 as well.
As others have said, it'll be a bit better if the rockwork was higher, but not too close to the waterline.
Also, you might want to glue that peak rock that's balancing between the two structures to prevent it from falling.
I will be gluing things together once I have the final scape idea down :)
I just didn't want to glue things together prematurely!
 
OP
OP
Clo

Clo

Well-Known Member
View Badges
Joined
Feb 8, 2021
Messages
627
Reaction score
1,546
Location
New Orleans
Rating - 0%
0   0   0
I like #1 it gives you a good sense of depth. The focal point is there. It makes me wonder what's behind that archway as the path draws me in, or what's inside the cave. I agree with the others, work vertically now to draw the eye away. You want fish swimming mostly around the scape or over it?
In it, around it really. I don't particularly want them to avoid it
 
OP
OP
Clo

Clo

Well-Known Member
View Badges
Joined
Feb 8, 2021
Messages
627
Reaction score
1,546
Location
New Orleans
Rating - 0%
0   0   0
770707E9-8AA2-4000-B069-839F4449B702.jpeg

Too much maybe? Not sure anymore
 

Mastering the art of locking and unlocking water pathways: What type of valves do you have on your aquarium plumbing?

  • Ball valves.

    Votes: 38 52.8%
  • Gate valves.

    Votes: 38 52.8%
  • Check valves.

    Votes: 15 20.8%
  • None.

    Votes: 18 25.0%
  • Other.

    Votes: 6 8.3%

New Posts

Back
Top