If you hit the start WPS does it see a network for you to join?
What is your 802.11 settings higher up? Did you set it to b/g/n or b/g.
What is your 802.11 settings higher up? Did you set it to b/g/n or b/g.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Can you make sure that connection is well the P4. Try to turn off P4 and check if you still see the connected device. *Yes, I do see this connection although it is not called “Profilux4”, but rather a string of numbers capital letters and dots...
If you hit the start WPS does it see a network for you to join?
What is your 802.11 settings higher up? Did you set it to b/g/n or b/g.
Can you make sure that connection is well the P4. Try to turn off P4 and check if you still see the connected device. *
Another question do you know what device is using the 192.168.1.18 replying to the ping ?
Can the issue lie with my windows laptop? It is a crap cheap unit that has gone out of memory to continue to perform the windows updates...
Well, all my other devices are connected from 74 and up. Only my laptop is in the .18 position. No other is using the .30 channel.Hard to tell but a cheap PC with right configuration should work fine for Gcc.
Can you post a picture of the connected devices setting on router side.
Just by curiosity did you try the IP on Web browser directly to see if you have access to the webinterface ?
Well, all my other devices are connected from 74 and up. Only my laptop is in the .18 position. No other is using the .30 channel.
I did not ry entering the ip directly. Which IP are you referring to? The P4?
Well it cannot be connected to 5ghz due P4 Wifi is only 2.4ghz capable.Uma coisa que não faz muito sentido é que apesar de eu ter selecionado o SSID da rede de 2.4ghz no meu router diz que o P4 está ligado à rede de 5ghz...
Well it cannot be connected to 5ghz due P4 Wifi is only 2.4ghz capable.
Do you have the dual antenna activated or do you have set both in separate mode ?
Nao faz nadaSorry, not sure why I started typing in Portuguese...