So I have these hammer heads one is doing g really good the other kind of slacking here a picture of parameters also I feed phyto fest roti fest and tig
red fest I also vacuum my sand today
red fest I also vacuum my sand today
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yah idk it sucks i need learn how to do youtubeVideo isn’t working for me
I was running my radion xr15 4th gen at 55% on a 36 gallon bowface I dropped down to 43% and my mp40 is set at 34% highest and my 2 mp10 at 45-50 %Mag slightly high but I see the likely issue already. Hammers are not picky about their placement but my experience has been at the sand not favorable as sand particles ittitate them. More important is the flow in the video. Hammer require moderate light and water flow. You want to avoid the extremes with them. . . . Extreme light and extreme flow. Additionally too much flow can tear their flesh and cause polyp recession. They should sway with the current.
Too much light will cause them to emit their zooxanthellae which is their color and energy source and lead to bleaching.
Assure the calcium level is no less than 380-400 for skeletal health.
The flow may be aimed at the hammer. Move it away slightlyI was running my radion xr15 4th gen at 55% on a 36 gallon bowface I dropped down to 43% and my mp40 is set at 34% highest and my 2 mp10 at 45-50 %