Innovative Marine New Fusion 15 build

OP
OP
Tuan’s Reef

Tuan’s Reef

2500 Club Member
View Badges
Joined
Dec 27, 2018
Messages
3,791
Reaction score
3,733
Rating - 100%
7   0   0
2 days worth of skimmate, zero micro bubbles ...Pretty sure i made the right decision on the skimmer.

1669128719556.png
 

Aaron75

Well-Known Member
View Badges
Joined
Nov 13, 2019
Messages
781
Reaction score
561
Rating - 0%
0   0   0
2 days worth of skimmate, zero micro bubbles ...Pretty sure i made the right decision on the skimmer.

1669128719556.png
Do you have to run your 2nd/3rd chamber a little deeper to get a good waterline for the skimmer?
 
OP
OP
Tuan’s Reef

Tuan’s Reef

2500 Club Member
View Badges
Joined
Dec 27, 2018
Messages
3,791
Reaction score
3,733
Rating - 100%
7   0   0
I currently have my heater in the 2nd chamber but i will move it to the bottom of the return chamber when i install my refugium. The rear sump water level is still the same.

The Tunze 9001 fit this tank perfectly if you glue the magnet on the side of the skimmer.


1669129779777.png
 

The Deaf Reefer

Active Member
View Badges
Joined
Aug 29, 2022
Messages
255
Reaction score
162
Location
Oakville, Ontario
Rating - 0%
0   0   0
I currently have my heater in the 2nd chamber but i will move it to the bottom of the return chamber when i install my refugium. The rear sump water level is still the same.

The Tunze 9001 fit this tank perfectly if you glue the magnet on the side of the skimmer.


1669129779777.png
Whats the white part? Is that the bottle ato thing?
 
OP
OP
Tuan’s Reef

Tuan’s Reef

2500 Club Member
View Badges
Joined
Dec 27, 2018
Messages
3,791
Reaction score
3,733
Rating - 100%
7   0   0
Yes, the white thingy is where the bottle attaches to the ATO. Works perfectly with zero chance of failure. For a tank this size, salinity is of high importance.
 

Aaron75

Well-Known Member
View Badges
Joined
Nov 13, 2019
Messages
781
Reaction score
561
Rating - 0%
0   0   0
I currently have my heater in the 2nd chamber but i will move it to the bottom of the return chamber when i install my refugium. The rear sump water level is still the same.

The Tunze 9001 fit this tank perfectly if you glue the magnet on the side of the skimmer.


1669129779777.png
It's hard to tell in the picture, are you higher than the 2nd wall? I have my water level cascade down about .5 inches.
Screenshot_20221122-072433_Samsung Internet.jpg
 

jimmy904

New Member
View Badges
Joined
Oct 1, 2021
Messages
17
Reaction score
60
Location
lake city
Rating - 0%
0   0   0
Are you going to actually run both or are you going to see which one performs and/or looks better and run one?
Hey I have a question. I have the same light on my IM 30 gallon long tank. What light schedule are you running?
 
OP
OP
Tuan’s Reef

Tuan’s Reef

2500 Club Member
View Badges
Joined
Dec 27, 2018
Messages
3,791
Reaction score
3,733
Rating - 100%
7   0   0
My Apex Jr. just arrived this morning from Saltwateraquarium.com. Just finished installing it and updating it today. The PH and Temp probes are the new versions and looks great. Powerbar EB8 is on route and will be here on Friday.

1669769628304.png


1669769655889.png


1669769677581.png


1669769704817.png


1669769766173.png
 

Mailman17013

Community Member
View Badges
Joined
Mar 17, 2022
Messages
56
Reaction score
61
Location
Newville, PA
Rating - 0%
0   0   0
I just set my IM15 cube up today. I've had the rocks cycling in another aquarium for about a month and also added a couple well established rocks from another setup. Threw in a few zoa frags and a GSP frag to see how they do. Also used about ten gallons of water from a water change I did this morning on one of my other tanks. Plan to put a pair of clownfish in here. I'm running the Noopsyche Mini7 led light.
im15.jpg
 

Exodusjpg

New Member
View Badges
Joined
Sep 29, 2022
Messages
16
Reaction score
14
Location
Arizona
Rating - 0%
0   0   0
I just set my IM15 cube up today. I've had the rocks cycling in another aquarium for about a month and also added a couple well established rocks from another setup. Threw in a few zoa frags and a GSP frag to see how they do. Also used about ten gallons of water from a water change I did this morning on one of my other tanks. Plan to put a pair of clownfish in here. I'm running the Noopsyche Mini7 led light.
im15.jpg
Would you mind sharing your lighting profile for the Noopsyche mini?
 
Back
Top