Whoookid201
New Member
Hello all! Long time listener; first time caller. I've taken in so much knowledge from this forum, but today I've finally decided to contribute. Here's my Innovative Marine NUVO Fusion 30 Pro Build. It's been up and running since Feb 2021 and it has taken me a lot of trial and error to get to this point. I've had a few setbacks but I finally feel like I have a good feel for my tank and plan on adding some new inhabitants and maybe some coral soon. He's my aquarium and part lists. Feel free to ask question.
Tank
Innovative Marine NUVO Fusion 30 Pro
MightyJet 538 GPH DC AIO Submersible Return Pump
(2) VCA Slip-Fit-Drop Adapter - 19mm to 1/2in Loc-Line (Forgot I had these until this write-up. Just installed, but upside down to raise the position of the returns)
(2) VCA 1/2in Random Flow Generator - RFG050
(2) 3D Printed Water Level Risers (Purchased, not made.)
i Flow H2O Check Valve 3/4” (To stop sump chamber from overfilling when return pump is turned off.)
Custom Stand (I'm proud of this one. I designed it myself.)
Frame: 80/20 Aluminum (aka T-Slot)
Panels: .220 HDPE
Filtration
(2) inTank Media Basket (Removed the middle shelf to form one large chamber.)
Bonded Poly Filter Floss
MarinePure Two Quart Box - 1 1/2” Spheres Ceramic Biomedia
(3) MarinePure 90g Gems Ceramic Media
(2) Bubble Magus MiniQ Nano Skimmer
Sicce Shark PRO 500 Internal Filter (Running 2:1 Carbon/GFO in the return chamber.)
Lighting
(2) Aqua Illumination Prime 16 HD LED Reef Light - Black Body
(2) Aqua Illumination Prime LED Tank Mount - Black
Heating/Cooling
Inkbird ITC-308S
BRS 100W Titanium Heater Element
Sea Side Aquatics Aquarium Cooling Fan - 4 Fan (It's cooler in the NE now so I've stored it until the Spring)
Circulation
EcoTech Marine VorTech MP10QD - Mobius Ready QuietDrive Propeller Pump
ATO/Mixing Station
BRS 4 Stage Value PLUS RO/DI System - 75GPD
Tunze Osmolator Universal 3155 Auto Top Off
(3) Ace Roto-Mold 7 Gallon Rectangle Flat Bottom Tank | SP0007-RT
(Right) ATO Reservoir w/float valve for filling
(Middle) RODI Water Container w/float valve for filling
(Left - Work in Progress) Saltwater Mixing Container (Waiting until I run out of water in the right and middle containers to I complete this project.)
Power/Controller
(2) Kasa Smart Plug Power Strip HS300 - 6 outlet (One is currently in use, the second will be added as part of the mixing station project.)
Tank
Innovative Marine NUVO Fusion 30 Pro
MightyJet 538 GPH DC AIO Submersible Return Pump
(2) VCA Slip-Fit-Drop Adapter - 19mm to 1/2in Loc-Line (Forgot I had these until this write-up. Just installed, but upside down to raise the position of the returns)
(2) VCA 1/2in Random Flow Generator - RFG050
(2) 3D Printed Water Level Risers (Purchased, not made.)
i Flow H2O Check Valve 3/4” (To stop sump chamber from overfilling when return pump is turned off.)
Custom Stand (I'm proud of this one. I designed it myself.)
Frame: 80/20 Aluminum (aka T-Slot)
Panels: .220 HDPE
Filtration
(2) inTank Media Basket (Removed the middle shelf to form one large chamber.)
Bonded Poly Filter Floss
MarinePure Two Quart Box - 1 1/2” Spheres Ceramic Biomedia
(3) MarinePure 90g Gems Ceramic Media
(2) Bubble Magus MiniQ Nano Skimmer
Sicce Shark PRO 500 Internal Filter (Running 2:1 Carbon/GFO in the return chamber.)
Lighting
(2) Aqua Illumination Prime 16 HD LED Reef Light - Black Body
(2) Aqua Illumination Prime LED Tank Mount - Black
Heating/Cooling
Inkbird ITC-308S
BRS 100W Titanium Heater Element
Sea Side Aquatics Aquarium Cooling Fan - 4 Fan (It's cooler in the NE now so I've stored it until the Spring)
Circulation
EcoTech Marine VorTech MP10QD - Mobius Ready QuietDrive Propeller Pump
ATO/Mixing Station
BRS 4 Stage Value PLUS RO/DI System - 75GPD
Tunze Osmolator Universal 3155 Auto Top Off
(3) Ace Roto-Mold 7 Gallon Rectangle Flat Bottom Tank | SP0007-RT
(Right) ATO Reservoir w/float valve for filling
(Middle) RODI Water Container w/float valve for filling
(Left - Work in Progress) Saltwater Mixing Container (Waiting until I run out of water in the right and middle containers to I complete this project.)
Power/Controller
(2) Kasa Smart Plug Power Strip HS300 - 6 outlet (One is currently in use, the second will be added as part of the mixing station project.)
Last edited:
