Jebao cp-40 crossflow pump. Is there anywhere I can get parts?

[kass03]

I have several of these pumps and I love them for the few months they work until the little rectangle silicone piece that sits on the propeller wears out. I'm tired of buying a new pump just for this piece.
I have tried repairing them with silicone but it doesn't last long.
I have contacted Jebao several times and never got a reply.
Does anyone know where I can get these or if there's a DYI fix for it?

Thanks

 

[MSB123]

I have several of these pumps and I love them for the few months they work until the little rectangle silicone piece that sits on the propeller wears out. I'm tired of buying a new pump just for this piece.
I have tried repairing them with silicone but it doesn't last long.
I have contacted Jebao several times and never got a reply.
Does anyone know where I can get these or if there's a DYI fix for it?

Thanks

Jebao are known for being cheap and it is impossible to contact them. I would suggest going to the DIY forum or buying a new pump.

 

[Mako56]

Hey Kass don't know if you remember me just was searching around and seen you were on here. I really miss the old group we had. Anyways it's nice to see you are still around.

 

[Musclebai]

i have the exact same problem ...the white thingy is work out on of the propellers...anyone found a solution yet?

 

[Triggreef]

Guess no solution yet

 

[Musclebai]

Guess no solution yet

i got a quote for a new impeller mechanism from below ebay seller [in my case the price at which i got the entir e gyre unit and replacement was very close and i ended passing it]

Security Measure

rover.ebay.com

I ended up buying a new scp 150...

 

[Triggreef]

I'm working on a solution to save these pumps. I won't know for a few days if it's going to work. Silly that they don't offer a rebuild package. These rubber pieces will never last much more than a year.

 

[jdelgado0440]

I have several of these pumps and I love them for the few months they work until the little rectangle silicone piece that sits on the propeller wears out. I'm tired of buying a new pump just for this piece.
I have tried repairing them with silicone but it doesn't last long.
I have contacted Jebao several times and never got a reply.
Does anyone know where I can get these or if there's a DYI fix for it?

Thanks

Hi there,

The solution I used was to build out the rubber piece with Corallife epoxy, it works just fine and it fixed the problem for me... it’s been over two years when I fixed it and it’s working just fine. The key is to make it exactly the same size as the rubber part. So I used the rubber piece from the other side as my temple.

I hope the pictures help.

Jorge

 

[Triggreef]

Hi there,

The solution I used was to build out the rubber piece with Corallife epoxy, it works just fine and it fixed the problem for me... it’s been over two years when I fixed it and it’s working just fine. The key is to make it exactly the same size as the rubber part. So I used the rubber piece from the other side as my temple.

I hope the pictures help.

Jorge

that works too.

I ended up finding someone with a 3D printer that made new plastic ones. He has the file now. Can't remember his name atm but he is on here with a huge 3d printing thread. I was going to make a new thread with the info but never got to it. I'll get it done soon.

 

[roland34]

that works too.

I ended up finding someone with a 3D printer that made new plastic ones. He has the file now. Can't remember his name atm but he is on here with a huge 3d printing thread. I was going to make a new thread with the info but never got to it. I'll get it done soon.

i made a stl file for this piece
hope it help

jebao cp-40 replacement part by Roland34

replacement part for jebao cp-40

www.thingiverse.com

roland

 

[WallyB]

i made a stl file for this piece
hope it help

jebao cp-40 replacement part by Roland34

replacement part for jebao cp-40

www.thingiverse.com

roland

Hey @roland34 ,

You just made my Day,

My CP40 has been sitting in a bin for few months.
I fixed it a few times with BONDIC which is a UV Curing Glue. Then Filed it down with Diamond file.
Sure it worked, but it always wore out after a few months of running.
Pain to keep Redoing.
and my Rubber cap was getting Paper Thin.

I just tried your 3D print version of the Rubber CAP.
Works like a charm, and if it wears out, Quick Replacements easy to make.

MY CP-40 is working Again.

BIG THANKS!!

 

[vincentchua]

Hi, I hv cp-40w
One of the fin broken
Who n where can advise to get a replacement?

 

[vincentchua]

That’s the spinning fin... I hope I name it right

 

[WallyB]

That’s the spinning fin... I hope I name it right

I looked all around for CP-40 parts before DIY fixing mine impeller shaft.

You may want to contact fish-street by email. They are a reseller and might have contact with their supplier.

They carry parts for other Jebao models.

https://m.fish-street.com/jebao_rw_fs_wp10wp25wp40wp60_replacement_kits

Unfortunately nothing for the CP-40 on the web site.

If you do score part from them, update this thread.