looking for someone to 3d print media cups to replace filter socks for pro clear cylinder system

[SALTWATER FISH HIPPIE]

hello, i am looking for someone to 3d print filter media cups that will fit the sump on pro clears 125 cylinder system. the systems socks are not the standard 4" but closer to 3.5 let me know if you or anyone you know anyone that may be interested. thanks
shane

 

[KStatefan]

hello, i am looking for someone to 3d print filter media cups that will fit the sump on pro clears 125 cylinder system. the systems socks are not the standard 4" but closer to 3.5 let me know if you or anyone you know anyone that may be interested. thanks
shane

Do you have the STL file for what you want printed?

 

[SALTWATER FISH HIPPIE]

Do you have the STL file for what you want printed?

No I do not.

 

[720 Reefer]

Check out fishofhex.com

He has 4", but he will also fill custom orders. Not sure the details and if you need to have the STL file or if he can just go off dimensions. But worth a shot.

 

[Greybeard]

Quick google session turns up this...

Accessories | pro clear aquatic systems

The Pro Clear Aquatic Systems 4” Sock Canister will make you forget about filter socks. This product is designed to replace filter socks in an EcoReef Sump. Each Sock Canister comes with a sponge that can be easily removed with our included sponge remover. The included sponge will help pick up large

www.pro-clear.com

They're showing a sock cup, if that's the same size. If it's not, you're going to need to do a measured drawing of some sort to make the cup from.

 

[SALTWATER FISH HIPPIE]

Quick google session turns up this...

Accessories | pro clear aquatic systems

The Pro Clear Aquatic Systems 4” Sock Canister will make you forget about filter socks. This product is designed to replace filter socks in an EcoReef Sump. Each Sock Canister comes with a sponge that can be easily removed with our included sponge remover. The included sponge will help pick up large

www.pro-clear.com

They're showing a sock cup, if that's the same size. If it's not, you're going to need to do a measured drawing of some sort to make the cup from.

thank you but the sump that comes w the proclear cylinder takes a sock that is only 3.75 x 6.

 

[KStatefan]

If you found the STL file for the 4" it could be scaled down to your 3.5"

 

[Greybeard]

Try this...

3.5x5.9 inch filter sock cup by GreybeardFM

For SW Fish Hippie... 3.5" body, 3.8" rim, 5.9" tall, 2.5mm thick Intended to fill with floss or whatever as filter sock replacement for marine aquarium sump V2 uses more printable holes, should be much less of a problem stringing.

www.thingiverse.com

 

[SALTWATER FISH HIPPIE]

Let me get back to you. Want to make sure it would fit. If so what would it cost to have three made and shipped to 47394?
Thank you

 

[adriantron]

Did you get this to work!