MP10 and MP40 / Octo Pulse 2 and 4 Anemone Guards

[Shirak]

This thread is for the general discussion of the classified ad MP10 and MP40 / Octo Pulse 2 and 4 Anemone Guards. For more information about this item, please click the link or ask a question in this thread.

Please add to the discussion here.

 

[ilovemarinetanks]

Hi, do you have 3d printed anemone guards for the sicce nano pumps?
Thank you!

 

[Shirak]

Hi, do you have 3d printed anemone guards for the sicce nano pumps?
Thank you!

Thanks for the inquiry, but I am sorry I don't have a pump to model a guard.

 

[pecan2phat]

Any possibility of printing guards for the older gyre xf230?

 

[Shirak]

Any possibility of printing guards for the older gyre xf230?

Sorry I don't have any to work with. Really difficult to make decent guards without the actual pump to work with.

 

[Shirak]

Also been tinkering with flow modifying adapters for the top of the nem guard and as separate clip on items for MP and Octo stock guards. Medium wide flow and a wide flow

 

[pecan2phat]

Shirak,
Have a question on your MP40 and MP10 guards.
Will they fit the base of non QD wet sides (ES version)?
I think the non QD mp10 might be the same but the MP40 looks different.

Thanks.

 

[Shirak]

Shirak,
Have a question on your MP40 and MP10 guards.
Will they fit the base of non QD wet sides (ES version)?
I think the non QD mp10 might be the same but the MP40 looks different.

Thanks.

Do you have photos? I can give you measurements but I am not finding any info on non QD wet sides. I purchased MP10 and 40 wet sides from BRS so I could model the guards. They list them as MP10QD and MP40wQD

 

[pecan2phat]

Here are a few photos of the non QD 40.
Only accurate measurement with small calipers are 73mm ID for cage. OD with a ruler looks like 78mm.

 

[pecan2phat]

For the MP10, I think they are the same dimensions as the newer QD versions but doesn't hurt to ask.
From my calipers, the cage looks like 53mm ID and 63mm OD.

 

[Shirak]

I am getting about 57.5-58 ID on the MP10 QD cover and 63 OD
MP40 QD cover 74.5-75 ID, 80 OD

If you really want to see if they would fit the base I can print the bottom part where the tabs are and you can see how they fit.

They both look pretty darn close

 

[pecan2phat]

I think the MP10 guards will fit fine since they actually might have been an early version of the QD.
So how about I purchase two MP10 guards and you can send me the bottom part for the MP40 guard. This way if it fits, I'll just order the MP40 guard separately.
How do I go about ordering this, thanks.

 

[Shirak]

I think the MP10 guards will fit fine since they actually might have been an early version of the QD.
So how about I purchase two MP10 guards and you can send me the bottom part for the MP40 guard. This way if it fits, I'll just order the MP40 guard separately.
How do I go about ordering this, thanks.

Sounds good. Can send me a DM for paypal info etc.

 

[Shirak]

Just received and MP60qd Guard from EcoTech. Will have a Nem guard designed and sized for the MP60qd next week hopefully.

 

[Shirak]

MP60qd Nem guard is done. Printed in black ABS. Replaces the stock guard. Has the impeller shaft support at the front. Twice as many ribs in front to help limit larger snails from getting into the impeller area. Slightly larger than the stock guard which reduces suction forces across the outer face of the guard. High quality prints.. take a long time to print.
$37/guard
$69 for two
plus $4 shipping per package.

 

[rocket098]

how much for2 mp40 and one mp60

 

[Kathy Floyd]

Hi - do you have one for this type:

Hydor Koralia Nano 240 Aquarium Pump, 240 gph

Thanks!

 

[Shirak]

Hi - do you have one for this type:

Hydor Koralia Nano 240 Aquarium Pump, 240 gph

Thanks!

Hi! Sorry I do not currently have one for Hydor Koralia pumps

 

[Kathy Floyd]

Hi! Sorry I do not currently have one for Hydor Koralia pumps

Ok, thank you. Please let me know if you ever do. The nylon covers are a PITA.

 

[Shirak]

I had a request for the MP40 Nem guard with flow widening nozzle. Size and angle of the center and outer cones can be tailored.