- Joined
- Jun 8, 2018
- Messages
- 1,149
- Reaction score
- 642
ok history
i just bought a new mp40qd a few months ago (manuf date of 11-12-2020), I also got a used mp40qd (manuf date of 5-14-2020) that ran on a WXM Module for the apex, from a friend
I installed the new one first, both physically and on the mobius app a few weeks ago before I purchased my apex. now I have installed the apex and the older mp40.
nowhere comes the issue.
prior to adding the older mp40 to the Mobius app, I could link it to the WXM module and control it via my apex dashboard NO PROBLEM, However, I could not attach the newer mp40 to the APEX via the WXM module. despite following this procedure over an over and over again.
every time, without fail, I tried to perform the very last step, I never, NEVER! GOT OR GET the blue-yellow staus light on the newer pump (manuf date of 11-12-2020). NEVER. preforming this step took me to an INSTANT green light, I found this odd because; the above process worked fine for the older mp40qd. (manuf date of 5-14-2020) no problem
so i decided to shift focus, cause i was :mad:..... I got both pumps operating in a master-slave relationship, in the Mobius app. they work great via the app. . so I go back to try and sync the pumps with the wxm module and my apex.
now-- remember? the older pump would connect to the wxm!!! but not the new one!!
now both pumps will not attach to the WXM module and I no longer get the blue/yellow status on the older pump, when preforming the very last step, i still get no blue-yellow staus light on the newer and now older pump, they both now go start to INSTANT green light, and the only thing i did was add both pumps to the mobile app.
will someone help me out here, I want apex control/monitoring of these pumps on my dashboard (one-stop-shop control) what am i doing wrong?
i just bought a new mp40qd a few months ago (manuf date of 11-12-2020), I also got a used mp40qd (manuf date of 5-14-2020) that ran on a WXM Module for the apex, from a friend
I installed the new one first, both physically and on the mobius app a few weeks ago before I purchased my apex. now I have installed the apex and the older mp40.
nowhere comes the issue.
prior to adding the older mp40 to the Mobius app, I could link it to the WXM module and control it via my apex dashboard NO PROBLEM, However, I could not attach the newer mp40 to the APEX via the WXM module. despite following this procedure over an over and over again.
every time, without fail, I tried to perform the very last step, I never, NEVER! GOT OR GET the blue-yellow staus light on the newer pump (manuf date of 11-12-2020). NEVER. preforming this step took me to an INSTANT green light, I found this odd because; the above process worked fine for the older mp40qd. (manuf date of 5-14-2020) no problem
so i decided to shift focus, cause i was :mad:..... I got both pumps operating in a master-slave relationship, in the Mobius app. they work great via the app. . so I go back to try and sync the pumps with the wxm module and my apex.
now-- remember? the older pump would connect to the wxm!!! but not the new one!!
now both pumps will not attach to the WXM module and I no longer get the blue/yellow status on the older pump, when preforming the very last step, i still get no blue-yellow staus light on the newer and now older pump, they both now go start to INSTANT green light, and the only thing i did was add both pumps to the mobile app.
will someone help me out here, I want apex control/monitoring of these pumps on my dashboard (one-stop-shop control) what am i doing wrong?
Last edited: