I'm new to this....our ATI powermodule (hybrid t5/led seems to think it has 4 LED spots and our light only has 2. I can't seem to find where to change this setting. Any help greatly appreciated!!!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I'm new to this....our ATI powermodule (hybrid t5/led seems to think it has 4 LED spots and our light only has 2. I can't seem to find where to change this setting. Any help greatly appreciated!!!
8. Connect control box to computer. a. Wired Connection: Connect an Ethernet cable from the port on your computer to the port on the control box. b. Wireless Connection: Open the wireless settings and connect to “ATI-Fixture.” This also may take a few minutes. (While you are connected to the control box wirelessly, you will not be able to access your normal wireless internet connection.)
9. Open a web browser and navigate to 192.168.1.1/login
10. Login with default username and password: (admin/admin)
11. Select your language.
12. Set new username and password. Write them down or save them as there is no way to retrieve them if they are forgotten.
13. Choose your type of lamp.
a. 24” fixture = 1 module (1x75W)
b. 36” fixture = 2 module (2x75W)
c. 48” fixture = 3 module (3x75W)
d. 60” fixture = 4 module (4x75W)
14. Run self-test.
15. Save settings.