Getting a hydra in a few days but wont be getting the mount as it cost too much lol so im thinking of a way to mount the light on the tank. Hanging kit if last resort lol. I have an extra leftover long piece if aluminium that was used for my solar panels and im thinking of using this but i dont have a way to mount it on my tank. Theres no stand for me to screw it into so thats a no already. I was thinking like using something that screws to tighten on the rim of the tank(dont know whats it called) but i dont know how to make out that can be used with the pole i have. Any help would be greatly appreciated!
Need help finding a way of making a DIY hydra26 hd mount.
- Thread starter Jonathan lee
- Start date
- Tagged users None
Depending on where the tank is and how you want to mount the light I could make some suggestions..
If you decide to use that aluminum get an L bracket from homedepot and screw it to the wall.. many of colors shapes and sizes
https://www.homedepot.com/p/Richeli...cVFjmhDHlKL04ClrnRLuaU-ZVIp2tbVIaAqx3EALw_wcB
If you decide to use that aluminum get an L bracket from homedepot and screw it to the wall.. many of colors shapes and sizes
https://www.homedepot.com/p/Richeli...cVFjmhDHlKL04ClrnRLuaU-ZVIp2tbVIaAqx3EALw_wcB
Jonathan lee
Active Member
- Joined
- Jan 9, 2018
- Messages
- 265
- Reaction score
- 110
No wall near by ahaha thats the prob. Dont worry if all else fails then a hanging kit it will be. Thanks for chiming in
No problem!
Similar threads
