Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thank you. I just bought this 25:3/4. How about the connection to the manifolds. What did you do?I'm pretty sure those sizes are generic across all the tanks. You will have to get a metric thread to standard slip to hard line it down to your return if you aren't looking to replace that whole part. They barely have a nub of metric pipe coming out of the union into that threaded "T" should be a 25mm fitting at least thats what mine is on my 55.2 frag.
The other easier option IMO is use this.
Metric to Standard Union Coupling
Slip to Slip Union Coupling Available in: 20mm to 1/2", 25mm to 3/4", 32mm to 1", 40mm to 1 1/4"www.coralvue.com
That union should screw right onto your current bulkhead so you can plumb down a 3/4 hard line to your sump. Im going to be using the same thing this weekend to plumb in a larger sump for my system.
You can get rid of the manifold altogether. The 25mm to 3/4 union will thread directly to the bottom side of your bulkhead. If your planning on keeping it i would just add a 3/4 T into your hard pipe i think thats just a threaded 3/4 that the manifold comes off of. Not 100% sure on that though, just guessing from a photo I have of my manifold connector. Dont mind the cobwebs lol one of the reasons I'm changing over to a remote sump instead of one under the stand. Just not enough rm to keep things clean.Thank you. I just bought this 25:3/4. How about the connection to the manifolds. What did you do?
Thank youYou can get rid of the manifold altogether. The 25mm to 3/4 union will thread directly to the bottom side of your bulkhead. If your planning on keeping it i would just add a 3/4 T into your hard pipe i think thats just a threaded 3/4 that the manifold comes off of. Not 100% sure on that though, just guessing from a photo I have of my manifold connector. Dont mind the cobwebs lol one of the reasons I'm changing over to a remote sump instead of one under the stand. Just not enough rm to keep things clean.