Noopsyche K7 Pro II Review and Growth Thread

[Jlschweda]

I'm having trouble assembling the mount. I have 2 screws left, small ones and I cannot figure out how to attach the bracket (with light) to the mount arm. I'm assuming the bracket slides in/onto the mount arm, but the screws are too small and I can't figure out where they go.

Can someone help?

Thanks in advance

 

[MSB123]

I'm having trouble assembling the mount. I have 2 screws left, small ones and I cannot figure out how to attach the bracket (with light) to the mount arm. I'm assuming the bracket slides in/onto the mount arm, but the screws are too small and I can't figure out where they go.

Can someone help?

Thanks in advance

Picture?

 

[Jlschweda]

Picture?

 

[Manose]

Those screws go into the two holes in picture 4 and connect though the holes in picture 3.

 

[Jlschweda]

Those screws go into the two holes in picture 4 and connect though the holes in picture 3.

That's what I thought, but there's nothing to tighten the screws. They just keep turning. I need something like a nut to tighten the screw to hold the bracket to the arm. That's the problem I can't figure out.

 

[Manose]

That's what I thought, but there's nothing to tighten the screws. They just keep turning. I need something like a nut to tighten the screw to hold the bracket to the arm. That's the problem I can't figure out.

I will take a picture tomorrow to show you.

 

[Jlschweda]

I will take a picture tomorrow to show you.

Ok, thank you so much!

 

[Jlschweda]

Got it! After seeing more pics online, I got it together. I was so tired I couldn't think straight last night.

Thanks for all the help

 

[TK_KW]

Solved
@Dana Riddle @dantimdad

For full coverage, for 36” light to sandbed, for 24” light to sandbed, multiply all numbers by 2/3.
Adjust as nessairy

What is the on off schedule of the t5s? F Colume

 

[noopsyche]

What is the on off schedule of the t5s? F Colume

On/Off are turn on the t5 bulbs and turn off the t5 light bulb.

 

[Manose]

What is the on off schedule of the t5s? F Colume

That schedule was not made with the t5's in mind as it had not come out yet. The schedule would need to be altereda lot if you are doing t5.

 

[dantimdad]

Was going to say that but he beat me to it.

I have to say that I like programming the K7s through the T5 much better than the remote. It seems more stable for lack of a better explanation.

 

[jnels]

That schedule was not made with the t5's in mind as it had not come out yet. The schedule would need to be altereda lot if you are doing t5.

Any advice on settings and schedule for K7 II/T5 hydrid?

 

[Manose]

Any advice on settings and schedule for K7 II/T5 hydrid?

These were my settings but I wouldn't do anything without getting a par mater and checking the desired par first.

 

[Apoc68]

These were my settings but I wouldn't do anything without getting a par mater and checking the desired par first.

I am going to try your settings on my 180. Which T5 bulbs were you running with these settings?

 

[Manose]

I am going to try your settings on my 180. Which T5 bulbs were you running with these settings?

I was using ATI blue + on all.

 

[Apoc68]

Thanks!

 

[shakygator]

Thanks for the post guys. I used the AB+ schedule posted here and modified it for my 17" 40 Breeder. Adjusting to 50%. Going to take some PAR numbers in a bit.

 

[shakygator]

The original schedule was a bit too blue for my liking. Added a bit more white and removed the first/last white steps to give me blue only during dusk/dawn.

 

[shakygator]

Some more data for your consumption: