McPuff
Valuable Member
I've got the guts of 4 x Orphek Atlantik V2 lights that would be perfect for a DIY project. What's included?
- 4 x Diode board w/120 degree optics (304 total)
- 4 x control boards (wireless control)
- 16 x cooling fans
- 4 x temp sensors
- All mounting screws
- Tablet to control the lights (if you want it)
I upgraded to V4 and have no plans to use these parts... but you do! Everything is in excellent condition. Not a single diode is out. The lights haven't been used in a few years but they work very well! There are two connectors that need to be replaced (one on a fan, one on a diode board - no soldering required) but that will be easy and cheap. To run these you would only need 2 things: heat sink and power supply. That's pretty much it. Power supply from Orphek is about $150 each but if you're DIYing then you've got a cheaper source. Regardless, you can get 4 fully built out orphek atlantiks for very low cost.
These lights were developed to mimic a 10k metal halide in intensity and spectrum. With 4 of these you can light a pretty huge tank (3 light my 300DD 72x36" REALLY WELL). A little background on this version -- https://reefbuilders.com/2013/08/27...-red-blue-phosphor-leds-wifi-android-control/ ~ 180W per fixture
Let me know of any questions. Text/call me at (81zero) 8seven5-0001. Price is $250 obo shipped to the lower 48 states.
- 4 x Diode board w/120 degree optics (304 total)
- 4 x control boards (wireless control)
- 16 x cooling fans
- 4 x temp sensors
- All mounting screws
- Tablet to control the lights (if you want it)
I upgraded to V4 and have no plans to use these parts... but you do! Everything is in excellent condition. Not a single diode is out. The lights haven't been used in a few years but they work very well! There are two connectors that need to be replaced (one on a fan, one on a diode board - no soldering required) but that will be easy and cheap. To run these you would only need 2 things: heat sink and power supply. That's pretty much it. Power supply from Orphek is about $150 each but if you're DIYing then you've got a cheaper source. Regardless, you can get 4 fully built out orphek atlantiks for very low cost.
These lights were developed to mimic a 10k metal halide in intensity and spectrum. With 4 of these you can light a pretty huge tank (3 light my 300DD 72x36" REALLY WELL). A little background on this version -- https://reefbuilders.com/2013/08/27...-red-blue-phosphor-leds-wifi-android-control/ ~ 180W per fixture
Let me know of any questions. Text/call me at (81zero) 8seven5-0001. Price is $250 obo shipped to the lower 48 states.
