Replaced ATO tank with a shelf on my 525xl

OceanDiver

DEEPBLUE CURATOR
View Badges
Joined
Jul 23, 2018
Messages
389
Reaction score
385
Location
Northern Virginia
Rating - 0%
0   0   0
Since I piped my ATO to the vats in the back room of the basement, I decided to removed the ATO tank and make an acrylic / plexiglass shelf.

You need the following:

SimbaLux Acrylic Sheet Clear Cast Plexiglass 12" x 12" Square Panel 1/2" Thick (13mm) Transparent Plastic Plexi Glass Board with Protective Paper



Bosch T102BF 3-Piece 2-5/8 In. 13 TPI Clean for Plexiglas Bi-Metal Jig Saw Blades

and Glue. I used superglue.

The plexiglass is 12” x 12“ and needs to be cut down to 12” x 10”. And the 12“ x 2” piece needs to be glued to the bottom of the 12” x 10” along the 12” side .

works like a champ!!

1FF120B2-D1B4-4142-B646-D782E35B923D.jpeg
E8DE08D7-07DF-432C-8D1C-B78FF33CE8B0.jpeg
 

Mastering the art of locking and unlocking water pathways: What type of valves do you have on your aquarium plumbing?

  • Ball valves.

    Votes: 57 49.6%
  • Gate valves.

    Votes: 63 54.8%
  • Check valves.

    Votes: 26 22.6%
  • None.

    Votes: 28 24.3%
  • Other.

    Votes: 9 7.8%

New Posts

Back
Top