Roffs Red Sea Reefer 3XL 900 Exciting Build

goodtimes

Valuable Member
View Badges
Joined
Aug 20, 2012
Messages
1,560
Reaction score
1,019
Location
Northern Ohio
Rating - 0%
0   0   0
And so the adventure begins.
This build has been so much fun for me to work on.
I started with building my RODI setup in my basement. I mounted it above my washing machine which made it easier for me to tap into my water supply. The RODI water will be pumped approx 15ft away into my storage/mixing tanks
Equipment:
Kobalt Power Strip with Led Lights
BRS 7 Stage Pro Plus 75 GPD system
Aquatic 8800 Booster Pump Kit
Aquatic 75 GPD Auto Flush Kit
Triple TDS Monitor
D8C50D07-04E9-4B0A-A6BC-BD8989157250.jpeg
BE337FFE-7D8D-4625-AEEF-47761E40C972.jpeg
Following for a great build! Does the booster pump on the rodi and the auto flush valve each have their own a power supply?
 
OP
OP
Roff542

Roff542

Community Member
View Badges
Joined
Nov 2, 2021
Messages
41
Reaction score
54
Location
Douglassville
Rating - 0%
0   0   0
Following for a great build! Does the booster pump on the rodi and the auto flush valve each have their own a power supply?
Hello Goodtimes,
They both run together off one power cord via a Y connector that is included when you buy the pump. I will post a close up picture so you can see how it is connected.
 
OP
OP
Roff542

Roff542

Community Member
View Badges
Joined
Nov 2, 2021
Messages
41
Reaction score
54
Location
Douglassville
Rating - 0%
0   0   0
B66CAC8A-8DEE-4642-8CEE-3EBF45A05D40.jpeg
94630AA7-5152-46F5-B3E1-9E197DD1AB56.jpeg
The black wire comes off the pump connects to the “Y” splitter then connects to the auto flush just behind the pressure gauge then the other side of the “Y” splitter continues back above the pump to the power brick.
Very sorry it’s hard to get a good picture while it’s all assembled I hope this helps answer your question
 

goodtimes

Valuable Member
View Badges
Joined
Aug 20, 2012
Messages
1,560
Reaction score
1,019
Location
Northern Ohio
Rating - 0%
0   0   0
B66CAC8A-8DEE-4642-8CEE-3EBF45A05D40.jpeg
94630AA7-5152-46F5-B3E1-9E197DD1AB56.jpeg
The black wire comes off the pump connects to the “Y” splitter then connects to the auto flush just behind the pressure gauge then the other side of the “Y” splitter continues back above the pump to the power brick.
Very sorry it’s hard to get a good picture while it’s all assembled I hope this helps answer your question
Thanks! I’ll have to go look at mine now. I have not used the booster pump because I thought I needed another power supply.
 

A worm with high fashion and practical utility: Have you ever kept feather dusters in your reef aquarium?

  • I currently have feather dusters in my tank.

    Votes: 72 38.1%
  • Not currently, but I have had feather dusters in my tank in the past.

    Votes: 63 33.3%
  • I have not had feather dusters, but I hope to in the future.

    Votes: 25 13.2%
  • I have no plans to have feather dusters in my tank.

    Votes: 28 14.8%
  • Other.

    Votes: 1 0.5%
Back
Top