Show Off and Discuss Your Red Sea Reefer Series
- Thread starter Broadfield
- Start date
- Tagged users None
GregDaKeg
Active Member
Update. Now have it hooked up. It was a bit of a pain in the *** to get the network working. Other than that, seems to be working. I will hook up the DOS later after I build a shelf.Just about finished building the insert for under the tank. Need to pickup the grommets and let the paint cure for another day or two.
We have succeeded in improving the water supply pipe and greatly increasing the flow rate.
Anyone can easily modify the hose instead of piping.
Since the thin part has disappeared, the amount about twice as much as the original flowed.
Anyone can easily modify the hose instead of piping.
Since the thin part has disappeared, the amount about twice as much as the original flowed.
What are you trying to do? Yes, I know the difference.
42221 allows you to unscrew the nipple end allowing you to screw in 3/4” PVC pipe.
42222 just allows you to use vinyl tubing. It doesn’t allow for modification. To the part it self.
So, if you want to run PVC pipe from your drain and or return pipes on the bottom of the tank 42221 is the part that makes this possible.
One problem some folks have is they get hung up on the item description. The description utilizes which model tank the parts above are designed for. Most people utilize these parts to modify their tanks. Since they are getting used to modify the tanks the description is no longer relevant.
Not that it matters, but 42221 is also less expensive than the 42222 part.
Here’s another part of this thread with some links.
Show Off and Discuss Your Red Sea Reefer Series
This is an awesome project Prestige Reef is doing for Red Sea. He is setting up and will run a Reefer tank with as much Red Sea products as he possibly can.
www.reef2reef.com
Last edited:
thank you so much for this reply..... yes i am looking to plumb my reefer 450 to a trigger platinum 34.What are you trying to do? Yes, I know the difference.
42221 allows you to unscrew the nipple end allowing you to screw in 3/4” PVC pipe.
42222 just allows you to use vinyl tubing. It doesn’t allow for modification. To the part it self.
So, if you want to run PVC pipe from your drain and or return pipes on the bottom of the tank 42221 is the part that makes this possible.
One problem some folks have is they get hung up on the item description. The description utilizes which model tank the parts above are designed for. Most people utilize these parts to modify their tanks. Since they are getting used to modify the tanks the description is no longer relevant.
Not that it matters, but 42221 is also less expensive than the 42222 part.
Here’s another part of this thread with some links.
Show Off and Discuss Your Red Sea Reefer Series
This is an awesome project Prestige Reef is doing for Red Sea. He is setting up and will run a Reefer tank with as much Red Sea products as he possibly can.
who is using the crystal reef aquatics sump? been using for a year amd cant seem to get triton off the ground.... (too clean for fuge)
anyway... i am having a heck of a time dealing with particulates in the dt water. not having any real mechanical filtration is kind of a pita
anyway... i am having a heck of a time dealing with particulates in the dt water. not having any real mechanical filtration is kind of a pita
Sweet. The chosen one
aka
trident
aka
trident
juanrmattos
- Frag Plug Hater -
I’m in guys!!!....
New year, new reef
New year, new reef
We have succeeded in improving the water supply pipe and greatly increasing the flow rate.
Anyone can easily modify the hose instead of piping.
Since the thin part has disappeared, the amount about twice as much as the original flowed.
Careful of those clamps rusting into your tank. Are they stainless ?
for those you that have done the gate valve replacement i am windering does it impede flow? trying to think about how the inside diameter is reduced at the threaded coupler.
i am looking to plumb a trigger platinum 34 any advice wpuld be appreciated
one thing i noticed is that i see that some people get the 42221 and go with threaded to 3/4" and the other have a slip go OVER the 42221? not sure which is better? easier?
i am looking to plumb a trigger platinum 34 any advice wpuld be appreciated
one thing i noticed is that i see that some people get the 42221 and go with threaded to 3/4" and the other have a slip go OVER the 42221? not sure which is better? easier?
Last edited:
does anyone have a list of the parts needed to do this on a 525
The biggest problem with ALL red sea tanks is they are all necked down to a small 3/4 ID (25mm) on the stock return line. So the modification doesn’t effect flow. Once you restrict flow to a particular size that size is your limiting factor. So no matter how large the tubing is in your sump you won’t get any benefit from it. So just might as well go 3/4” and save space.
being an ocean engineer, I have no idea how redsea meets their flow requirements for the 525xl. The most I can push thru is roughly 550-600 gph. Their manual say over 1000gph. Not going to happen with a 3/4 pipe.
Is that a metal band clamp next to salt water?We have succeeded in improving the water supply pipe and greatly increasing the flow rate.
Anyone can easily modify the hose instead of piping.
Since the thin part has disappeared, the amount about twice as much as the original flowed.
Similar threads
