Curious why . Or if someone can answer a few questions how this is ….
noticed the few
Sps I added awhile ago have started to bleach from
The top . And within a day they’re completely white .
tested water but nothing jumps out at me other than curious why alk is higher …,,,
I have noticed a fair amount of cyano on the bottom ,
we’re in Canada and recently had a some extreme cold .
the dt is close to a door so maybe temp drop ?
current levels
Sg : 1.025 Hanna
Temp : 74.6°f
Alk : 8.12 ( 145 ppm ) Hanna
Nitrates 5ppm salifert
Phosphorus 39ppmb = 0.120ppm phosphates
previous levels
All the same other then
Temp : 79°
And alk 7.5
noticed the few
Sps I added awhile ago have started to bleach from
The top . And within a day they’re completely white .
tested water but nothing jumps out at me other than curious why alk is higher …,,,
I have noticed a fair amount of cyano on the bottom ,
we’re in Canada and recently had a some extreme cold .
the dt is close to a door so maybe temp drop ?
current levels
Sg : 1.025 Hanna
Temp : 74.6°f
Alk : 8.12 ( 145 ppm ) Hanna
Nitrates 5ppm salifert
Phosphorus 39ppmb = 0.120ppm phosphates
previous levels
All the same other then
Temp : 79°
And alk 7.5