Keko21
Valuable Member
View BadgesPartner Member 2024
Article Contributor
Hospitality Award
Ocala Reef Club Member
Reef Pumpkin Carver
MAC of SW Florida
R2R Secret Santa 2023
My Aquarium Showcase
I have a Reefer 350 G2 with the stock sump, Reefmat500, Reef Octopus 150 skimmer, and Orlushy return pump set at 850 GPH. (790 GPH recommended by Red Sea).
When I installed the reefmat I removed the filter sock holder and the 1st vertical glass baffle where the emergency down flow empties into.
The water level in my sump went up a bit- the water is literally level with the holes in the baffle between the filter chamber and skimmer chamber (it was a nice pour over theough the holes before). Then the water seems to be flowing nicely over the next baffle and sponge filter to the return pump chamber.
The flow seems ok and there doesn’t seem to be any stagnant spots- the pile of rocks is less flow but planning to dose with pods later so seems alright. Downflow valve seems good water just below and silent operation
As a noob I’m just checking in with y’all to see if I’m set up right or if adjustments need to be made…
When I installed the reefmat I removed the filter sock holder and the 1st vertical glass baffle where the emergency down flow empties into.
The water level in my sump went up a bit- the water is literally level with the holes in the baffle between the filter chamber and skimmer chamber (it was a nice pour over theough the holes before). Then the water seems to be flowing nicely over the next baffle and sponge filter to the return pump chamber.
The flow seems ok and there doesn’t seem to be any stagnant spots- the pile of rocks is less flow but planning to dose with pods later so seems alright. Downflow valve seems good water just below and silent operation
As a noob I’m just checking in with y’all to see if I’m set up right or if adjustments need to be made…