Hello all, Remodeling my tank from 210 to 428 and wanted a new thread for the remodel heavy with pictures and videos. Gathering all my stuff together for the build. and will post as it goes. Expanding the stand I have because its currently holding most of my LR and its got the external skimmer hooked up to it. Should be able to move it around a little but don't need much room to add onto the stand. Here is the GARF specs for the tank. not sure if I'm for the euro bracing but it would get those darn braces out of the way. Tank Information: Material = Glass Tank Height = 28" Tank Width = 49" Tank Length = 72 " Glass Thickness = 1/2" Approximate Gallons = 428 Cut List: have all glass ready to go Bottom = 71 " x 48" Using plywood with epoxy for bottom. Sky blue yay! Front = 72 " x 28" Back = 72 " x 28" 2 Sides = 28 " x 48" Top Front/Back brace = 72” x 2" Top Sides brace = 45 7/8” x 2 Drains are a 2'' siphon 21” from bottom with valve 2' drop from bottom roughly and a 2'' emergency wide open. Return from my super dart reeflo is 3”over up and over then reduced along the top entering at far end opposite of the DIY overflow. Internal circulation by 2 WAV and 2 PP20. If you wish to opine please do so.