Tank sizes and VorTech choices. How are yours paired?

[Reef Dude]

24”x24”x20” Aquarium

50 gallon water volume

Sps dominated mixed reef

2 MP40 QD’s on reefcrest anti-sync mode, attached to back glass as seen in the photos. They top out at 50% power.

 

[biecacka]

48/48/24 cube SPS tank slowly growing.

4 MP40’s. Tank is a walk around but mostly viewed as a “peninsula” 2 MP 40’s on the back wall and one on each side wall toward the front.

All running through all modes via a WXM on my apex

Corey

 

[Burrito]

100g 15mm thick glass, 48x24x20

2 mp40s opposite each other on a variety of programs

30G 8mm thick glass 36x11x12 (rest is AIO sump)

2 mp10s opposite

 

[wowkingjames]

Following....

 

[paal]

100g , 40x30x20 peninsula

2x mp40 back side, left. Both synced
1x mp60 back side, right. Anti-sync

90% Power. 30-40ish seconds long pulse, making the tank alternate between clock- and anticlockwise flow.

Roughly 75x tank volume/hour
...no sand

 

[paal]

100g , 40x30x20 peninsula

2x mp40 back side, left. Both synced
1x mp60 back side, right. Anti-sync

90% Power. 30ish seconds long pulse, making the tank alternate between clock- and anticlockwise flow.

Roughly 75x tank volume/hour
...no sand