Terry's 400 Gallon Upgrade

OP
OP
Terry4505

Terry4505

Active Member
View Badges
Joined
Mar 15, 2014
Messages
450
Reaction score
585
Rating - 0%
0   0   0
I've gone back and forth about what I want to do for lights. But for now, I've found a cheap solution that I'm happy with. I am using two 5000K outdoor LED flood lights in clamp fixtures and my 72" Reef Brite (which is really unnecessary upstairs, especially since I went to four Blue + bulbs in the fixture. The color isn't perfect, but for $50, it will light the tank for now, while I think about more permanent solutions.

IMG_20171110_170832.jpg


IMG_20171110_170904.jpg


I also replumbed the drains and returns. There was a slow drip in the return, where I didn't seat a ball valve well, and I had room to move the drains up, to get more downward movement in the pipes. I am happy with how it turned out.
IMG_20171110_170917.jpg


I also added a juvenile Imperator Angel, and a small Majestic Foxface to the big tank, as well as a fairy wrasse and a pair of mocha clowns to the 180. So far everyone is settling in well.

IMG_20171110_170756.jpg
 
OP
OP
Terry4505

Terry4505

Active Member
View Badges
Joined
Mar 15, 2014
Messages
450
Reaction score
585
Rating - 0%
0   0   0
Made some massive changes to the system. I'll shoot a video walkthrough later, but here's the basics...

I had an electrician come and install a new panel, with three dedicated circuts, one for the fish room.

With the help of my dad, we ran 4 boxes, one switched outlet, all on GFCI for the fish aread:

IMG_20171111_132535.jpg


IMG_20171111_132541.jpg


IMG_20171111_132546.jpg


IMG_20171111_132551.jpg


It really helped clean up the wiring and ditching all of the Daisy chained power strips.

I also had to replace the bottom sump, the 40B just didn't have enough capcity for a power outage. I used a 75, which works perfectly:

received_10213830328528970.jpeg
 
OP
OP
Terry4505

Terry4505

Active Member
View Badges
Joined
Mar 15, 2014
Messages
450
Reaction score
585
Rating - 0%
0   0   0
So... this is not a fun post, but I think it will have a positive outcome.

I was sound asleep last Thursday when I heard my wife scream from the kitchen that there was water running in the basement. I obviously panicked and jumped out of bed, and ran downstairs to the sight of water gushing out of the right side of the 420.

MVIMG_20180203_121829.jpg


MVIMG_20180203_121834.jpg


The seam between the front and side glass split about 2/3 of the way down. I was able to open the emergency drain on the back of the tank below the break, saving around 100 gallons and keeping the fish alive.

We then began the tedious project of pushing as much of the water into the sump pump. There was standing water on most of the basement floor. My best guess is that the tank was not perfectly level, and the uneveness caused stress on the front glass. This is just a guess. The tank was used, and it could simply have been age. I took a few days to think about what I wanted to do next. I thought about just taking it down, but I didn't want to give up too soon.

I decided to try to fix it. I was able to get silicone into the seam as far as it split, and used ratchet straps to pull the glass back together. I also releveled the tank while it was mostly empty. I didn't trust the silicone to hold on its own, so I built a frame for the top of the tank (and am planning on putting one around the bottom of the tank as well.) I cut it to fit snugly, then used ratchet straps to pull it tight before I screwed it together.

IMG_20180204_095704_01.jpg


IMG_20180204_095708_01.jpg


At this point, the tank is about 3/4 of the way full, and no issues. Only time will tell. We are a long way away from finishing the basement, so I guess I will wait and see. This was not a fun experience. And if it was my fault, not a mistake I will make again.
 

Greybeard

2500 Club Member
View Badges
Joined
Feb 10, 2017
Messages
3,231
Reaction score
8,668
Location
Buffalo, MO
Rating - 0%
0   0   0
Ugh. Many of us have nightmares about this sort of thing. You're right, hard to post when something like this happens, but this is the sort of thing that might cause someone else with an out of level tank to look twice. You may well save someone's home with the post. Yours is in the basement... many of us would have a far worse mess to clean up.

When purchasing my new tank, several features I incorporated were done, at least in part, in order to help me sleep nights.
-18" deep, shallow==less pressure
-Rimmed bottom: I really wanted to rimless look, but decided to do a rimmed bottom anyway.
-Steel stand: I _know_ it's square, level, won't flex, won't get soft over time...
-Screw jacks under tank in crawlspace to keep it level.

Best of luck with your re-seal. I have _not_ had positive experiences with this kind of thing.
 
OP
OP
Terry4505

Terry4505

Active Member
View Badges
Joined
Mar 15, 2014
Messages
450
Reaction score
585
Rating - 0%
0   0   0
Well...

The tank is full, and reconnected to the system. So far, everything is good. Time will tell if my fix is a fix, or a band aid.

Full new.jpg
 

skilos1

Community Member
View Badges
Joined
Dec 8, 2015
Messages
64
Reaction score
21
Rating - 0%
0   0   0
Ive seen water gushing out of a front seal of a 300 gallon before, not a very nice feeling at all. Glad you seemed to have plugged the hole and everything is going good now.
 

A worm with high fashion and practical utility: Have you ever kept feather dusters in your reef aquarium?

  • I currently have feather dusters in my tank.

    Votes: 64 36.8%
  • Not currently, but I have had feather dusters in my tank in the past.

    Votes: 59 33.9%
  • I have not had feather dusters, but I hope to in the future.

    Votes: 25 14.4%
  • I have no plans to have feather dusters in my tank.

    Votes: 26 14.9%
  • Other.

    Votes: 0 0.0%
Back
Top