Vortech MP40's, Power Monitoring & Maintenance Mode

Users Who Are Viewing This Thread (Total: 1, Members: 0, Guests: 1)

Member No 1

Well-Known Member
View Badges
Joined
Dec 17, 2017
Messages
625
Reaction score
429
Location
Rehoboth, MA
Rating - 0%
0   0   0
Ok, so how do I work around this?
P4 with a Vortech Control Module controlling (4) MP40's.
Maintenance Mode 4 set to Power Monitoring
Maintenance Mode 3 set to ALL PUMPS STOP including the (4) MP40's.

Here is the issue...
During a power outage, I want the (4) MP40's to run in Constant Mode at 20% (GHL equivalent 51)
This I can do without issue. In the Vortech Control, set Maintenance Mode to 4, and set Maintenance to Constant 51.
I can also choose Maintenance Mode 3 also as shown below.
In the program pane, Maintenance is listed under "Number" but under "Mode", I can only set it for one or the other. Either "OFF" for the power outage, or
like below, "Constant" "51". I don't see a way to have both. Under "+ ADD" you can't add another Maintenance Mode. Also, you can't use sockets or
Programmable Logic to control Vortech's.

Any Ideas?

1590752159390.png
 

A worm with high fashion and practical utility: Have you ever kept feather dusters in your reef aquarium?

  • I currently have feather dusters in my tank.

    Votes: 74 37.4%
  • Not currently, but I have had feather dusters in my tank in the past.

    Votes: 68 34.3%
  • I have not had feather dusters, but I hope to in the future.

    Votes: 25 12.6%
  • I have no plans to have feather dusters in my tank.

    Votes: 29 14.6%
  • Other.

    Votes: 2 1.0%
Back
Top