I can’t for the life of me figure out how to get this piece on! Someone help please
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
IKEA has better instructions lolThe holes might not line up. I had to get one panel replaced 4 times before I could finish my stand on the 220. It's like something from ikea
No kidding!IKEA has better instructions lol
Hi there!
You will need to use the following hardware to install this part:
You should have 4 sets-- you will use two on each end of Panel N; the screws go into the back panels.
For further assistance, please send us an email to [email protected] so we may further assist you.
Happy fishkeeping!
I really appreciate you getting back to me. I made it work with what I was sent.I'm sorry to see that-- we will get this handled for you as soon as possible. Please fill out a Claim Form using the link below; our Claims Manager will be able to arrange for a replacement to be sent to you:
Claim Form
All claims must be submitted within 24 hours of receiving your shipment. Waterbox will not honor damage or defective claims once the product has been assembled and the aquarium has been taken off the original shipping pallet base. If you receive a damaged item and refuse the replacement, your...waterboxaquariums.com
I have the exact problem aswell... I made a claim as the OP suggested and this was my response this morning..I have the exact same problem with my 180.5 cabinet with the installation of the "N" cabinet section. What was your resolution with Waterbed?
Claims Department (Waterbox Aquariums) Jan 6, 2021, 9:28 EST Hi Matt, the N board would use the usual cam screws and locks - the older version of the N board and different hardware is not used any further. The N board needs to be installed at a specific point - see newest user manual here for the cabinet: https://cdn.shopify.com/s/files/1/0273/6590/0397/files/Waterbox_Manual_Cabinets.pdf?v=1602693432 |
No resolution really. You can either undo everything and assemble that piece earlier on in the steps, drill a pocket hole to secure the piece. Good luck!I have the exact same problem with my 180.5 cabinet with the installation of the "N" cabinet section. What was your resolution with Waterbed?