What do you think of my triton results?

[JOKER]

Tank info: 140 gallon display, 40 gallon sump, filtration is RO elite 220 skimmer-120# pukani- 50# shelf rock- 3 marine pure 8x8x4 blocks- filter sock-remote deep sand bed 18"x17"x10". Flow 2 gyre 250, and jebao dc12000 set on 2. I use AWC of 2 gallons a day- add 4ML 2 part a day, tank is SPS dominant (frags to small colonies right now). My maintenance consist of making up water once a month, cleaning glass 1-2 times a week, and feeding 1 time a day sometimes 2. Thanks for looking!!
https://www.triton-lab.de/en/showroom/aquarium/auswertung-b/icp-oes/47152/

 

[Randy Holmes-Farley]

The MarinePure is the likely source of the aluminum, which is fairly high, IMO. Maybe not high enough to be a concern, but getting up there.

0.5 ppm (500 ug/L) aluminum caused an issue in my tests, but 0.05 ppm (50 ug/L) did not.

Chemistry And The Aquarium: Aluminum In The Reef Aquarium ? Advanced Aquarist | Aquarist Magazine and Blog
http://www.advancedaquarist.com/2003/7/chemistry

 

[Randy Holmes-Farley]

Nothing else seems a big problem from being too high, but some things might be too low and could benefit from dosing.

 

[JOKER]

Thanks for the reply. The tank has been running for 11 months. The sump has ran for 16 months with the marine pure. Do you think it will go higher after that much time?? what would you recommend me to dose, and how would you recommend dosing? Thanks again. The tank is sps dominant, and fish light right now. I have 10 fish in QT now so hopefully I can up the poop. LOL

 

[madweazl]

Nothing else seems a big problem from being too high, but some things might be too low and could benefit from dosing.

What elements would you prioritize dosing with the above results?