you need just an eb8 or eb4 if you want to control a heater. youll also need a PM1 for temp/PHI just need the eb8 and not the eb832 correct? just trying to add up the cost to see if it worth it just for temp control.
thanks
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
you need just an eb8 or eb4 if you want to control a heater. youll also need a PM1 for temp/PHI just need the eb8 and not the eb832 correct? just trying to add up the cost to see if it worth it just for temp control.
thanks
Agree with above. All you would need is a EB4 or EB8 and a PM1 module with a pH and temp probe per system. Label each system in Fusion and you are good to go.
I also use these to run long runs between Modules.
can you tell us more about those please? what are they for? to make a male to male aquabus?
I will only be going 15-20 max still think I need those?Yes. I use a minimum of 18 Guage wiring between Modules. I have run up to 60' without an issue.
I'm considering this to eliminate my junior.. just need to figure out how to get a USB from second tank to first tank. It would have to be 50 feet
Exactly - I'll have to figure a way out but once you have one cable ran.. you can just Daisy chain them to all required equipmenti think those race wire hider things would work. if you can go above or basement that would be nice too!
i cant have a mess of wires running across the house..
SO only one wire to run? then you can get a USB hub or what not to link other modules up??Exactly - I'll have to figure a way out but once you have one cable ran.. you can just Daisy chain them to all required equipment
SO only one wire to run? then you can get a USB hub or what not to link other modules up??
If you dont care about the control and dont want to spend the extra money you can always just get a inkbird and plug your heater into that. (again youll have no control over anything, but will only cost you $40ish)
Yes. One wire. Then each module has outputs to go to other modules and you can use the regular aquabus cables there if yuu want or make your own with wire and connectors.