plubming

Inkbird Heater Controller - $25 Titanium 100 Watt Heater - $25 Cepex 3/4 ball valve - $20

I currently have a 75g mixed reef without a sump. I’m thinking about getting a bigger tank in the years to come but I also think it might be wise to plumb for a basement sump now and try to get some experience with it before I upgrade the tank. I think if I get a sump rated for say a 250g that...

I am planning on setting up a Cor-15 with a 1” return line to my tank. Should I be using 1 or 2 return bulkheads and are there any differences that I would notice if I only have 1 return outlet?

Hi all I have a hypothetical plumbing question. Let’s say you have two pipes with the same pumps running at 100% The first pipe is 10’ long and is then reduced 3/4” for 1’. It produces 100 gph. So the total length is 11’ The second pipe is 11’ of all 3/4 pipe. Will the second pipe maintain...

So I have 2 external pumps plumbed to my sump already with 1” pvc to each of them. I’m needing to add a 3rd pump. Do you think it would be fine to have 2 pumps both running off the same 1” pvc bulkhead? I’m really not want to drain my sump to drill a 3rd hole.

I just received my syncra sdc pump and was trying to fit it onto the dx plumbing, but the hose fittings are either to small or to big. Am I doing something wrong? photos of the waterbox pipe are attached