I know this may not be enough info. This 3155 has been working without any issues for the past 2 or more years. Know I have a problem with overfilling the sump by an inch or so. For the pst 2 months I have been leaving it off and running it twice a day which is not ideal. It will fill correctly the shut off. About 30 minutes later, sometimes longer, I will hear the overfill alarm and find it is an inch too high. I don’t get why it runs another fill cycle. I have cleaned the sensor eye and the float. Float is on a separate magnet to give it some more leeway until the overfill float is triggered. The pump (stock) is connected to a 1/2” silicone tube do I thought maybe it fills to much water into the tank before it registers in the return section of the sump. But it fills fine the first time. Any ideas? Should I send it in?
@rvitko
@rvitko
Last edited: