Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hi Roger,External mode, pulse and pulse power off, main speed 100%.
Yes, but you want to try this method, not the calibration for 7095/7096 we show in the Youtube video-
*The problem*
If two 7090s are connected with the cable and you set the master to 2 different low levels (main power 35%, pulse power 20%), and you set it to "inverse mode", the slave will always stay at full power.
*The solution* (today tested with 3 affected units)
1 -> set the 7090 to external control.
2 -> push the food timer button for around 10 seconds until the "pulse power" knob is starting to blink. Keep pushing it.
3 -> turn it to the position shown in the picture
4 -> Release the food timer button.