Bypass is. Don’t remember wire colors. One way will work, other won’t. Meaning cut out that black thing and remove it, then reattach the wiresO you took it completely off line
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Bypass is. Don’t remember wire colors. One way will work, other won’t. Meaning cut out that black thing and remove it, then reattach the wiresO you took it completely off line
So this is for direct 120vBypass is. Don’t remember wire colors. One way will work, other won’t. Meaning cut out that black thing and remove it, then reattach the wires
To add to this, I just noticed that while SaltwaterAquariums.com lists them as "Out of Stock" on their website, they in fact have 1 listed on ebay which seems like an effort to clear out their remaining stock? While I'd like to grab this, it makes me a bit hesitant as I've read of some people having the LED lights stop working, and only being able to get them replaced from clearwater themselves.
It doesn't change the voltage. That's not what that black box is. It's something to do to prevent the light from flickering. It was accidently added by the manufacturers where they should not have installed it. If you remove it then it'll go back to working.So this is for direct 120v
I ran it with the black box using 12v and then removed the box and ran it on 12v and nothing.. i tried flipping the wires and nothing.. it worked with the box but after a few minutes would start flickeringIt doesn't change the voltage. That's not what that black box is. It's something to do to prevent the light from flickering. It was accidently added by the manufacturers where they should not have installed it. If you remove it then it'll go back to working.
As I have said, bypass that box and it'll work again. Simple as that.
Don’t know what to tell you. This was the instructions given to me by Clearwater. I followed the instructions and they worked again for me.I ran it with the black box using 12v and then removed the box and ran it on 12v and nothing.. i tried flipping the wires and nothing.. it worked with the box but after a few minutes would start flickering