This is sitting in my Ebay cart along with those brackets
80/20 Inc T-Slot 3" x .75" Smooth Aluminum Extrusion 15 Series 3075 x 72" N
Condition: New
80/20 Inc T-Slot 3" x .75" Smooth Aluminum Extrusion 15 Series 3075 x 72" N
Condition: New
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Awesome! This is an old picture but it is the same mount.This is sitting in my Ebay cart along with those brackets
80/20 Inc T-Slot 3" x .75" Smooth Aluminum Extrusion 15 Series 3075 x 72" N
Condition: New
Yep. Holds my XR15 now. Trying to find a pic.Nice and Solid , I see no deflection at all
Why?Hopefully the pressure threated posts are for the kid's play set...lol.
Thanks. I will try! I tend to get into a groove and forget to take picturesLooks like a well thought through and fun project! Don't forget to take lots of pictures during the build!
.......
To confirm...
Four frames are assembled with pocket screws.
Glue, clamp, and finish nail the frames together
Yeah?......
I indeed do have a nail gun. Only used it for finish work, not securing frames togetherYeah!
You certainly could use clamps, but infer that you have a nail gun.....that makes assembly very easy without clamps. With the piece on it's one side, apply glue to the "up" side. Align the front or back frame and shoot some nails.
If you aren't comfortable doing that. With the frames upright (like they would look when finished), put one side (with glue on the front and back edge of the frame) between the front and back frames and first lightly clamp together. Now, using your finger to feel the alignment, make sure everything is aligned. Snug up the clamp and shoot it together. Pull off the two clamps and repeat for the other side.