Does anyone tried other options for fleece roll 10" that fits in the platinum trigger systems?
Thank you
Thank you
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It's in stock with BRSDoes anyone tried other options for fleece roll 10" that fits in the platinum trigger systems?
Thank you
Give Steven at https://preconfilter.com/ a shout and he can get you squared away with whatever you need. Only issue is all his rolls are 2" cores so you will have to save a 1" and reroll it. If you buy enough to spread the shipping costs out you can end up under $15 a roll.
I looked at prEcon Filter but I didn’t see anything in 8” roles. I don’t mind moving the filter to a new role but I don’t know that I want to cut 2” off the whole thing and bank on it feeding.
Just email them. They will precut any size you need. The only difference is you want to keep your old rolls so you can reuse the core as his are a different diameter core.
Hey there did you receive your fleece roll? I’m still on the fence between the 50 micron and 80 micron. In your opinion does the fleece on the 80 micron roll seem about the same as the trigger systems standard roll or does it seem thinner? TIASteven at https://preconfilter.com/ is the way to go. 8"x200yd of 80 micron for 31.00 a pop. Have not tried yet, just got it shipped today. Since they are on 2" cores, I designed a smaller roller with sides to replace the trigger 26 8" roll setup. Will have sides to aide in re-rolling. Did I mention 200yd rolls!! If this works, adios Trigger rolls!!! Steve was fantastic to deal with. Did I mention 200yd rolls.
I did and just installed. Thusfar have seen less skimmate, algae scrubber picking up the rest. I have the 80 micron and while it feels a bit thin, it holds up. I performed a tear test between the 2 and they seem to tear with the same amount of pressure. Here is what I designed to reroll. Is very simple but hell, it works. Designed a plug for the roll from PreCon and new spindles for installing on the sump. I added flanges so as the fresh fleece is unwound, as the dirty fleece winds it will stay straight and not want to birdsnest on the edges. Not a fancy setup, the winding handle is a bit oblong because i had to shorted it and had no idea how to use the design software, this was the first time I used a 3d printer and quite honestly, amazed it actually turned out (after a slew of misprints and test prints), I used tinkercad online (free, LOL). The large base also has a set of 1/8" mounting holes in case you want to screw it onto something. Let me know what you guys think, but in all seriousness, adios trigger fleece, PreCon is the way to go. Same results, if not better than OEM Trigger rolls.Hey there did you receive your fleece roll? I’m still on the fence between the 50 micron and 80 micron. In your opinion does the fleece on the 80 micron roll seem about the same as the trigger systems standard roll or does it seem thinner? TIA
Where is this design? I’d love to print one myselfI did and just installed. Thusfar have seen less skimmate, algae scrubber picking up the rest. I have the 80 micron and while it feels a bit thin, it holds up. I performed a tear test between the 2 and they seem to tear with the same amount of pressure. Here is what I designed to reroll. Is very simple but hell, it works. Designed a plug for the roll from PreCon and new spindles for installing on the sump. I added flanges so as the fresh fleece is unwound, as the dirty fleece winds it will stay straight and not want to birdsnest on the edges. Not a fancy setup, the winding handle is a bit oblong because i had to shorted it and had no idea how to use the design software, this was the first time I used a 3d printer and quite honestly, amazed it actually turned out (after a slew of misprints and test prints), I used tinkercad online (free, LOL). The large base also has a set of 1/8" mounting holes in case you want to screw it onto something. Let me know what you guys think, but in all seriousness, adios trigger fleece, PreCon is the way to go. Same results, if not better than OEM Trigger rolls.
Be happy to send you the files, i need to make one minor adjustment. Remember, this is a totally amateur attempt.Where is this design? I’d love to print one myself