Hey all this is my tank. It's close to wear I want it, minus the fact that corals need to grow out. Equipment, position, etc-wise most things is as they should be. I love softies and my tank is dominated by them. There a couple things I need to do but first my equipment list:
Equipment:
- 40Br tank with Stand and Canopy
- RotR rocks plus some liverock pieces that were used for seeding. (I am the owner of Reef on the Rocks)
- 40lbs of my own Aragonite sand. (Same stuff that I use in my rock production)
- 4 X 24 watt HO T5's (Don't remember bulbs.. but one 10K, 2 X Blue pluses, and an actinic I think)
- 1 X Vortech MP10 with DIY battery back up (Should last about 70-some hours)
- Filtration is a bit weird:
- It's the body of an Octopus BH-100F skimmer, but used as a sump.
- Phosban 150 w/ carbon and phosban mixed together.
- Ranco (Dual) with 2 X 75 watt stealths and a lasko vent fan for cooling.
- Milwaukee SMS122 pH controller (Use it to monitor only)
- Auto top off (Water only) w/ Aqualifter + 6G reservoir.
Typical maintenance:
- BRS two-part for typical reef tanks (Dosed daily)
- BRS Magnesium (Dosed weekly)
- 5G water change using Reef Crystals (Weekly)
- Try to scrape walls off weekly... "try"
Things I need/want to do:
- Paint "reef room" that I patched the holes and stuff.
- Re-brush off the two "algae rocks" that were seeding rocks (They came from a poorly done tank). I am just trying to leech the rest of the phosphate from the seeder live rock b/c I like the corals on them too much.
- Need to get water tested just to see where I am... it's been a while.
- Need to get more water through the pre-skimmer to take care of the water-surface scum.
- Need to super scrape the walls and vinegar the pre-skimmer box, plus the Vortech's wet side.
Equipment:
- 40Br tank with Stand and Canopy
- RotR rocks plus some liverock pieces that were used for seeding. (I am the owner of Reef on the Rocks)
- 40lbs of my own Aragonite sand. (Same stuff that I use in my rock production)
- 4 X 24 watt HO T5's (Don't remember bulbs.. but one 10K, 2 X Blue pluses, and an actinic I think)
- 1 X Vortech MP10 with DIY battery back up (Should last about 70-some hours)
- Filtration is a bit weird:
- It's the body of an Octopus BH-100F skimmer, but used as a sump.
- Phosban 150 w/ carbon and phosban mixed together.
- Ranco (Dual) with 2 X 75 watt stealths and a lasko vent fan for cooling.
- Milwaukee SMS122 pH controller (Use it to monitor only)
- Auto top off (Water only) w/ Aqualifter + 6G reservoir.
Typical maintenance:
- BRS two-part for typical reef tanks (Dosed daily)
- BRS Magnesium (Dosed weekly)
- 5G water change using Reef Crystals (Weekly)
- Try to scrape walls off weekly... "try"
Things I need/want to do:
- Paint "reef room" that I patched the holes and stuff.
- Re-brush off the two "algae rocks" that were seeding rocks (They came from a poorly done tank). I am just trying to leech the rest of the phosphate from the seeder live rock b/c I like the corals on them too much.
- Need to get water tested just to see where I am... it's been a while.
- Need to get more water through the pre-skimmer to take care of the water-surface scum.
- Need to super scrape the walls and vinegar the pre-skimmer box, plus the Vortech's wet side.
Last edited: