I was having issues with my ca reactor keeping up with my alk demand and thought that I would just have my apex turn a doser for a small amount pending how low my alk tested at. I increased the pressure of my regulator on the reactor and it has helped. I have the kh monitor now but wish that it was the controller model. Cant justify another $500 or so for the controller model.Are you wanting the KHG to dictate the dosing or why cant you just use the OSC code to dose and then adjust as needed using the KHG to monitor.
I accidentally fried the power regulator inside mine and was able to send the board back to kh guardian in Taiwan and they fixed it reasonably. If yours wont be covered under any warranty contact them direct and they will take care of you. Super great company for support.Hey so I have an odd one. For the past few weeks my KHG would not draw SW into reaction chamber. I tried to de-gas, purge chamber and everything but I would keep getting a PW<Err even when nothing would be in the reaction chamber. When I would go to degas the SW line, it would not even kick the SW pump on and would give me a error. SW line was clear and not blocked and didn’t even have air bubbles in the line.
So I noticed a burning smell in the house today and after some work investigating everything, realized it was coming from the controller. I opened up the back panel after unplugging the unit and saw a couple of black pools on the chip card. When I plugged in the power, I saw that one of the black tower things on the chip card (sorry, I have no idea how to make sense of a chip card and what part is what) was smoking and melting. I immediately unplugged it. I purchased early 2018 and submitted a ticket with Coral Vue. I’m lucky I was home or it would definitely started a fire.
Curious though, has anyone experienced anything similar?
Jeff