So I don’t really post on here much. I creep the forums everyday and generally just browse. So here’s a little about myself. I started back in 2009 with a 24g aquapod. A few years later I switched to an IM Nuvo 30. I’ve been through all kinds of equipment trying to figure out what I like. Currently I run an AI Sol over my nuvo with multiple MP10s throughout. I just graduated college (Environmental, Soil and Water Science) and my wife and I bought a new house. I decided I’m finally going to build a bigger tank that I’ve always wanted. So here it is. I had a 180 I was setting up but it wasn’t going to fit properly in our new house so I had some parts I had acquired for it that I can use on this tank.
Here is my plan for the tank.
93g Marineland Rimless Cube - Bought
16" Ghost Overflow (Cannot find one) or Herbie Drain with a 6x6 corner overflow.
30" Trigger Systems Elite Sump
2 MP40s for the sides - Bought
1 MP10 on the back wall - Bought
Aquamaxx EM200 Skimmer (Cannot find one) or RLSS R6i
1 Radion Pro Gen 3
Jaebo DC6000 for the return pump
Reef Keeper Controller - Bought
Tunze Osmolator top off - Bought
Aquamaxx Biomaxx Biopellet reactor
Carbon Reactor
Caribsea Pink Fiji Sand - Bought
I will keep this thread going with updates and equipment arrivals.
Here is my plan for the tank.
93g Marineland Rimless Cube - Bought
16" Ghost Overflow (Cannot find one) or Herbie Drain with a 6x6 corner overflow.
30" Trigger Systems Elite Sump
2 MP40s for the sides - Bought
1 MP10 on the back wall - Bought
Aquamaxx EM200 Skimmer (Cannot find one) or RLSS R6i
1 Radion Pro Gen 3
Jaebo DC6000 for the return pump
Reef Keeper Controller - Bought
Tunze Osmolator top off - Bought
Aquamaxx Biomaxx Biopellet reactor
Carbon Reactor
Caribsea Pink Fiji Sand - Bought
I will keep this thread going with updates and equipment arrivals.