I've hit a Bobbitt worm with mine and it just jumps back in its hole, not really effective, takes a few seconds for the laser to do real damage and the worm isn't waiting around for that.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have been using lasers for a few years on aiptasia. My wife shoots the ones that are easy to get to with Aiptasia X and that is significantly more effective ... definitely requires less patience. But, the buggers that are under a ledge can only be hit with the laser. We have a 90 display & 55 refugium.
I too, was/am a member of the laser forum and bought a rather expensive laser (plus goggles, charger, + batteries) from one of the builders. I did this because we had gone thru a litany of zappers, "natural" enemies, and chemical cures. As mentioned above, chemical is quite effective if you are shooting down. The electronic zapper ($$) is very effective but does require a direct shot all the way to the foot of the pest.
"Natural" ... I have spent a lot on shrimp ($) in several orders from different sources and am pretty certain that never worked. Also, have used berghia nudi branches ($$$$). They work extremely well. Unfortunately they only eat aiptasia ... then die. Also, you put them in a tank that has anything that might eat them. Everything eats them ... even some of those **** shrimp that were supposed to go after the aiptasia. Quite interesting how long those shrimp last. Even more interesting that after not seeing any for months and the safe assumption is that they have all died, how they suddenly pop out when adding the nudis! :-(
Back to the laser, after a year the diode got too weak and needed replacement. Unfortunately that builder no longer responded to any posts or email. It was rated at about 3W and did work well enough so I decided to check out ebay (again). From a Chinese vendor I found a laser advertised at 5W at the right wavelength ... and under $100. It finally shows up. I do not have a means of testing laser power, but it is every bit as powerful and possibly a bit more than the 1st. I have been using it for at least 2 years and just smoked (boiled?) a tenacious aiptasia yesterday. This guy was at the substrate and under a ledge.
In these past few years of using the lasers there have never been any critter damaging issues. All of the original and usual denizens (Tang, Clowns, chromis, etc) have come close at times for inspection at which times I do shut off the laser (lets not be stupid?!?!). But, no injuries. Success rate with the laser is, and guessing, about 50%. But, those are the nearly impossible to get to targets. Worms are too fast. On the other hand, flat worms on the refugium walls are easy targets.
Nothing better than hearing the crickle crackle of sizzling vermin. HAHAhahahahahaha
Last, a few month ago addition to the ref is the matted filefish ($). Ugly fish. But, is noted to have an aiptasia diet. The 1st few weeks was "ehhhh". It disappeared weeks ago. Great more pi$$ed away. It is worthy to note that during this time there are NO aiptasia in the ref. This morning ... there it was! OMG! Lurking deep amongst the plants under a rock ledge. I figured that it had starved despite twice daily feedings for the sand sifter gobie and the dottyback (for bristle worms). It is difficult to tell if you are feeding something that you never see, but have faith. I have resisted adding any fish to the ref, but some are a must for their utility. They don't act as if they are upset by feeling "used".
But,
and can it be focused too for under $100Got a link for this 5W laser from Ebay?
I wonder if they work! There are so many. Mostly from china, free shipping lol.I'd be very skeptical of a 5w laser for less than $100, and another thing to consider is heat, my 1.5w starts getting hot after about 40secs on time, 5w should get hot much quicker so heat dissipation is something to consider as well.
do you have a link to buy this kitI've been doing some research on the use of Laser light in eradicating and/or controlling certain pests frequent in marine aquaria. These include,
In theory, it should be a simply process to eliminate any unwanted life from an aquarium, and easily prune others (think of it as a lawn edger for an area of Xenia or GSP.) I'm also curious about the possibility of using Laser to "cauterize" part of a coral subject to RTN. It might also work well for laser-fragging soft corals such as Z&Ps as it could be done while the coral was still in the water.
- Aiptasia / Mojano
- Blue/Green Algae including Valonia and Bryopsis
- Xenia
- GSP
- Virtually any other unwanted pests such as vermetid snails, predatory crabs...
The most common laser pointers (< 3mW) do not generate anywhere near enough energy to be effective. Higher power lasers are now available that can emit enough energy to instantly "boil" the targeted pest, while avoiding damage to adjecent corals. The primary challenges with this approach,
I've ordered the components to build a 1800mW / 445nm laser to test the above theories and develop effective practices. Here's what the components look like (you can't purchase pre-built due to FDA regs)...
- Cost - Higher power lasers are expensive.
- Safety - Eye protection is an absolute nesessity as intant blindness is possible should the beam (or potentially a reflection) strike your eye.
- Legality - There are FDA imposed restrictions on the sale of Class IV lasers (<50mW) that make them difficult (read expensive) to acquire.
- Risk to livestock - Caution will have to be mainted to prevent fish from being struck by the laser. At very high power settings, even viewing the point being lased can result in damage to their eyesight.
The next challenge is safety (mine as well as that of the livestock.) At this power output, blinding could be instantaneous if shined in ones eye (including a reflection of the beam.) Even looking at the beam endpoint unprotected is dangerous. Safety goggles provide user/viewer protection. I'm still working on a shield to prevent injury to livestock. This idea was suggested by Lotus-Darkrose, a user in the Laser Pointer forums - albeit a bit difficult to deploy
From what I understand you have to have the right combo of power and wavelength for it to really work.Having tried this option with a 5 watt red laser. It doesn't work to well. I requires a lot of treatments on just one Aiptasia to kill it.
I ened up having better success with peppermint shrimp. Berghia nudibranchs work best if you can remove the rock and place it in a low flow tank like a 10 gallon QT tank.