Hi, so I had an idea of installing a diy uv sterilizer on my external skimmer outlet. Can anyone see any issues with doing that? It's about the right flow rate through there of about 3000lph. I would be looking at 80 - 100w uv lamp, ballast and all that stuff.
Could I not just replace the elbow on the outlet with a T. Use a gasket and all that for the quartz sleeve and uv bulb and have the uv running the length of the outlet inside the pvc.
Could I not just replace the elbow on the outlet with a T. Use a gasket and all that for the quartz sleeve and uv bulb and have the uv running the length of the outlet inside the pvc.