- Joined
- Feb 6, 2018
- Messages
- 200
- Reaction score
- 57
That's the brand and model.What do you mean by “trigger”
How do yall cut the acrylic for them? Where do you get the parts?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That's the brand and model.What do you mean by “trigger”
Mine isn’t complete yet but it holds 180gal full and will hold about 110g when in use. Plywood, pond armor & acrylic baffles and sock section
Hi, can you tell me where I can buy pvc or acrylic adjustable sump tank baffles/dividers. Can't seem to pinpoint a company that can. ThanksI do. Both my sumps are diy. One has acrylic panels and the other is Glass
Thanks for the info. I browsed your web page. Very nice systems. I would like to get a system like those but the problem is re-configuring all the water in/out pipes. I have a OCTO T -90 lux tank with an OCTO sump. The drains (primary and secondary are located on the right side of the pump as shown. I just purchased a Red Sea Reef Mat 250 and a narrower internal pump protein skimmer so they would both fit in the main middle compartment. I really just need a baffle/divider to put between the two units. Do you sell or make an adjustable baffle that will adjust widthwide and an adjustable slide for water flow?I have a super simple DIY 40 breeder sump on my frag system, check out my build thread if interested. Can recommend these kits: https://www.jaxracks.com/sump-kits
just to be clear, that isn't my website. If you can do a simple drawing or rendering of what you want, you can definitely send an inquiry to Jax Racks via their website, I bet they can make just about anything sump-related.Thanks for the info. I browsed your web page. Very nice systems. I would like to get a system like those but the problem is re-configuring all the water in/out pipes. I have a OCTO T -90 lux tank with an OCTO sump. The drains (primary and secondary are located on the right side of the pump as shown. I just purchased a Red Sea Reef Mat 250 and a narrower internal pump protein skimmer so they would both fit in the main middle compartment. I really just need a baffle/divider to put between the two units. Do you sell or make an adjustable baffle that will adjust widthwide and an adjustable slide for water flow?
Attachments
Will do, thank you so much.just to be clear, that isn't my website. If you can do a simple drawing or rendering of what you want, you can definitely send an inquiry to Jax Racks via their website, I bet they can make just about anything sump-related.